Bedienungsanleitung Blaupunkt ACR 4250 (Seite 9 von 14) (Englisch)

614610

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ACR 4250 GB

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Changing the memory bank

You can shift between the memory banks I, II

and T in order to store stations and recall

them later.

The currently selected memory bank is indi-

cated in the display.

• Toggle the FM button until the desired

memory bank lights up in the display.

Storing stations

On FM, you can store five stations on the

preset buttons 1 to 5 for each of the memory

banks I, II and T.

• Select the memory bank with FM.

• Tune into a station either automatically

or manually.

• Press the desired preset button until

the radio resumes play after the muting

and you hear the beep.

Now the station has been stored.

The activated preset button is indicated in the

display.

Note:

If you select an already stored station, the

corresponding memory bank and preset

button will flash in the display for about 6

seconds.

• Press the AF button for approximately 2

seconds until you hear the beep and

“REG OFF” is indicated in the display.

When active, “REG ON” will be briefly dis-

played each time the radio is switched on.

Selecting a station

With this car radio you can receive FM sta-

tions from 87.5 to 108 MHz.

Using the

buttons there are two different

ways to tune into a station:

Automatic tuning

Prerequisite: “AF” and “m” do not light up in

the display, i.e. the Alternative Frequency

function and manual tuning are switched off.

Use the AF and lo buttons (lo, m, -, lo) to

adjust the respective modes.

• Press

the car radio will auto-

matically search for the next station.

When keeping the

or the button de-

pressed, seek tuning will speed up in up-

wards or downwards direction.

Manual tuning

Prerequisite: “m” lights up in the display.

Toggle the lo button until “m” is displayed.

• Press

; the frequency will change in

short intervals in upwards or down-

wards direction.

When holding the or button down, the

frequency scan is speeded up.

Selecting the seek tuning sensi-

tivity

You can alter the automatic seek tuning

sensitivity.

For this,

• press the lo button briefly.

If “lo” is displayed, the radio will only pick up

strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick

up weaker, distant stations (high sensitivity).

Make sure that “m” is not indicated in the

display.

Switching from stereo to mono

(FM)

If reception is poor, you may get better sound

quality by switching to mono:

• Press the lo button until a beep sound

is released and the stereo sign

dis-

appears from the display.

Each time the radio is switched on, stereo

playback is activated (

is displayed).

The unit will automatically switch to mono if

the received signal is not strong enough for

stereo playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt ACR 4250 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt ACR 4250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info