Bedienungsanleitung Blaupunkt albertville rcm 149 (Seite 12 von 23) (Englisch)

165615

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

• Select the appropriate waveband by

pressing BA/TS.

• Tune in a station with the rocker switch

(either automatically

/ or manually

<< >>).

• Press the desired preset button until

the radio resumes play after the mut-

ing (takes approximately 2 seconds,

confirmed by a beep).

Now the station has been stored.

The display will indicate which preset but-

ton is currently activated.

Automatically storing the

strongest stations with Travel-

store

You can automatically store the six most

powerful FM stations in your current recep-

tion area sorted according to their signal

strength. This function is particularly conven-

ient on longer trips.

• Press the BA/TS button for 2 seconds.

“T-STORE” will appear in the display.

The six strongest FM stations will be auto-

matically stored on the memory bank “T”

(Travelstore). When this process has been

completed, the radio will play the strongest

station.

If desired, stations can also be stored man-

Manual tuning with << >>

You can also tune into a station manually.

Requirement:

AF and PTY must be switched off (i.e. the

symbols do not light up in the display).

If necessary, deactivate these functions:

• Press AF·TA or PTY.

Manual tuning:

• Press << >>; the frequency will change

in short intervals in the downwards or

upwards direction.

If you hold << >> pressed to the left or the

right on the rocker switch, the frequency

scan will speed up.

Scrolling through the broadcast-

ing networks (FM only)

You can use the << >> buttons to tune into

stations in your reception area.

If it is possible to receive several pro-

grammes in the same broadcasting network,

you can scroll through them in the forwards

direction by pressing >>, or backwards

using the << button, e.g. NDR 1, 2, 3, 4,

N-JOY, ...

For this to work properly you must have al-

ready tuned into the stations at least once

and “AF” must be active (lights up in the dis-

play).

To do this, you can start the Travelstore seek

operation:

• Press BA/TS for 2 seconds; the sys-

tem will start to run through the fre-

quency band.

If “AF” is not lit up,

• Hold AF·TA down. A beep sounds and

“AF” appears.

This fulfils the requirements for selecting

stations with << >>.

Switching between the memory

banks (FM)

You can switch between the memory banks

1, 2 and T in order to store stations and re-

call them later.

The currently selected memory bank ap-

pears in the display.

• Press the BA/TS button as many times

as necessary until the desired memory

bank lights up in the display.

Storing stations

On FM, you can store six stations on the

preset buttons 1, 2, 3, 4, 5, 6 for each of the

memory banks (1, 2, T).

On MW/LW, you can also store six stations

each

(Zermatt RCM 149 without MW, LW)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt albertville rcm 149 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt albertville rcm 149

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info