Bedienungsanleitung Blaupunkt Barcelona CM102 (Seite 14 von 15) (Englisch)

614666

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Barcelona CM 102

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

LED 2 - LED only blinks if the car

radio is not connected via

the ignition.

Loudness

Since your in-car sound quality is influenced

by the type of the installation (amplifier), the

type and arrangement of the loudspeakers,

and the vehicle itself, you may individually

programme at which level you want the set to

start boosting the basses (loudness).

For changing this loudness level,

● press the DSC button 5.

“BEEP ON” or “BEEP OFF” lights up

on the display B a.

● Now press the rocker switch

/ E

until ‘Loud’ and a number between 1

and 6 illuminate on the display B a.

● With the rocker switch << / >> D you

can match the above mentioned loud-

ness level to your personal require-

ments.

For memorizing this adjustment,

● press the DSC button 5 once again.

Indication of the Station Name

After having selected a station, the corre-

sponding frequency lights up on the display

B a. You can replace this frequency indi-

cation for all stored stations by the respective

name of the station (the German NDR, or

WDR, or BFBS).

Note the following:

The stations have to be stored.

The zone identification for traffic messages

(ARI) is no longer indicated.

For entering a station name, proceed as

follows:

● Press the DSC button 5.

“BEEP ON” or “BEEP OFF” lights up

on the display B a.

● Press the rocker switch

/ E until

“PRESET” is illuminated on the display

B a.

● Choose the desired station (via the

preset buttons), for which the name is

to be entered.

The frequency is indicated on the display

B a. All free digits are represented by das-

hes.

_ _ 89.60 _ _

The first dash is blinking. For changing it and

entering the desired character:

● Press the rocker switch << / >> D on

the right continuously.

The frequency indication disappears. Now

the following characters light up one after

another: a dot, the numbers (0 to 9), the

capital letters (A to Z), the blank, and the

special characters (e.g. umlauts and punc-

tuation marks).

For selecting a character:

● Press the ON/OFF button 1.

The selected character stops blinking

while the next character starts to flash.

For modifying the previous character:

● Press the ON/OFF button 1 for longer

than two seconds.

Once you have finished your entry, press the

corresponding preset button of the next sta-

tion, which you would like to be named. The

entered name for the previous station is then

automatically stored.

For storing the adjustment:

● Press the DSC button 5 once again.

Every time the station is selected, the speci-

fied name will be represented on the display.

A memorized station name can be deleted by

storing a new station on this button (i.e.

keeping the respective preset button depres-

sed for a longer period).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Barcelona CM102 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Barcelona CM102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info