Bedienungsanleitung Blaupunkt BHKA 754101 (Seite 13 von 20) (Deutsch, Englisch)

716217

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Machine Specic Safety Instructions

Know your Cordless, Brushless Combi Drill. Do not plug in the charger or install the battery in the tool until you have read and

understand this Instruction Manual. Learn the tool’s applications and limitations, as well as the speciﬁc potential hazards related to

this tool. Following this rule will reduce the risk of electric shock, ﬁre, or serious injury.

• Remove all packaging materials and the transport safeguards, if present. Keep packaging materials away from children –

danger of suﬀocation!

• Use only accessories that are designed for use with this tool. Follow the instructions that accompany accessories. The use of

improper accessories may result in injury to the operator or damage to the tool.

• Always keep hands out of the path of the drill bit. Avoid awkward hand positions where a sudden slip could cause your hand

to move into the path of the drill bit.

• Always make sure the chuck is tight and the drill bit ﬁrmly tightened in the chuck before starting the drill.

• Before starting the operation, press the drill switch to make sure the drill bit is inserted correctly and does not wobble or

vibrate.

• Secure the workpiece. Use clamps or a vice to hold the workpiece. It is safer than using your hand and it frees both hands to

operate the tool. Do not drill material too small to be securely held.

• Make sure there are no nails or foreign objects in the part of the workpiece to be drilled.

• To avoid injury from accidental starting, always remove the battery from the tool before installing or removing a drill bit.

• Do not install or use any drill bit that exceeds 17.5 cm in length or extends more than 15 cm beyond the chuck jaws. They can

bend or break suddenly.

• Make sure the spindle has come to a complete stop before touching the chuck or attempting to change the drill bit.

• To avoid ﬁre or toxic reaction, never use petrol, acetone, lacquer, thinner or similar highly volatile solvents to clean the tool.

Operating Instructions

The BLAUPUNKT 18v Lithium-Ion Brushless Combi Drill is used for drilling holes, driving screws, loosening or tightening various

materials together with fasteners.

Adjusting the Drill Settings to Torque, Drill or Hammer

Your drill is equipped with an adjustable torque clutch for driving diﬀerent types of screws into diﬀerent types of materials. It also

has settings for “drilling” and “hammer drilling”. The proper setting depends upon the type of material and size of screw being used

and the function required.

1. Identify the torque settings located on the torque adjustment ring (1) (Fig. 1).

2. Rotate adjustment ring to align the correct torque setting number with the torque indicator arrow (2). See the chart below

for correct torque settings.

Fig.1 Fig.2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt BHKA 754101 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info