Bedienungsanleitung Blaupunkt BP Car Phone 3.0 C (Seite 23 von 35) (Englisch)

614378

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

BP Car Phone 3.0 C User Manual

9.6.2 Version

To find out the current software version for the telephone unit (TPU) and the handset select MENU >

SETTINGS > DEVICE > VERSION. Then choose either PTC (for the telephone unit) or HA (for the

handset). The software version always begins with PTC for the telephone unit and HA for the handset.

9.6.2.1 Firmware update

To update your device’s firmware and profit from constant development go to MENU > SETTINGS >

DEVICE > VERSION > PTC > UPDATE. After you have selected UPDATE you will be asked to enter

the device code. After entering the code the device establishes a GPRS connection and checks whether a

more up-to-date firmware version is available. “Checking version” will appear on the display. If a more

up-to-date firmware version is available this is automatically downloaded and installed onto your device.

“Update running” and a progress bar will appear on the display. The device then restarts. The whole

update process can take several minutes. If there is not a more up-to-date version available than the

one currently installed then the device displays “Software is up-to-date”.

TIP

You can cancel the update process at any time with CANCEL.

NOTE

If you receive the error message “Internet Connection Error” when trying to update then the

update server is not available or the GPRS settings are incorrect. Try the update again at a later time. If

necessary correct the internet settings (see section 9.9 Internet).

GPRS connections can generate extra charges. Please contact your service provider for more

information.

9.6.3 Delay timer

The delay timer determines the length of time before the phone automatically switches off if the phone

has been inactive and if the ignition has been turned off. This function can be useful to prevent the

device from switching off if the ignition is only temporarily turned off (e.g. when fuelling). The delay

timer is restarted whenever the phone is used again (when any key is pressed). If the phone is switched

on using the power key when the ignition is turned off and the delay timer is set to 0 minutes, the

phone will turn itself off again after 15 minutes (not editable). Again the delay time will be restarted

when any key is pressed.

Select MENU > SETTINGS > DEVICE > DELAY TIMER to set the delay timer and choose one of the

options: 0 MINS (phone switches off when the ignition is turned off), 5 MINS, 15 MINS, 1 HR, 2

HRS, 4 HRS, 8 HRS, 12 HRS, 1 d, 7 d, 10 d or 30 d (MINS = Minutes; HR = Hours; d = Days).

NOTE:

This setting will not work if, contrary to the installation instructions, the ignition is connected to

the permanent positive!

9.6.4 Answering by lifting the handset

Select MENU > SETTINGS > DEVICE > ANSWER BY LIFTING HANDSET to choose whether you

want to answer a call simply by removing the handset from the holder. You have the option of selecting

ON or OFF.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt BP Car Phone 3.0 C Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt BP Car Phone 3.0 C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info