Bedienungsanleitung Blaupunkt BT DRIVE FREE 414 (Seite 11 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Finnisch)

614367

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Charging the battery

The BT Drive Free 414 is operated with a rechargeable battery. Charge the

battery completely before its  rst use. Read the section "Battery information"

before starting the charging process.

You have to remove the BT Drive Free 414 from the steering wheel for the

charging procedure. The charging socket is located at the side of the hous-

ing that rests against the steering wheel. Connect the BT Drive Free 414 with

the vehicle charging adapter via the USB cable. Insert the vehicle charging

adapter into the cigarette lighter of the vehicle. The BT Drive Free 414 can

also be charged with the USB cable connected to the computer.

Note: As soon as the charger is connected, the BT Drive Free 414 switches o .

During the charging process, the MF button lights red. After the battery is

fully charged, the MF button lights blue. The charging process of the battery

lasts approx. 3 hours. Disconnect the BT Drive Free 414 from the charger after

it has been charged.

A completely charged battery supports a talk time of up to 7 hours and a

standby time of up to 300 hours. If the charge state of the battery becomes

low, the MF button  ashes red every 3 seconds and you hear a warning beep

every 60 seconds.

Switching on/o

Switching on

To switch the unit on, press the MF button for approx. 3 seconds until you

hear a high-pitched signal tone and the MF button lights blue. Afterwards,

the MF button lights blue and the device is switched on.

Switching o

To switch the unit o , press the MF button for approx. 3 seconds until you

hear a low-pitched signal tone and the MF button lights red. Afterwards, the

device is switched o .

Registering (pairing) and connecting with the cell phone

Before you can use the BT Drive Free 414, you must register and connect it with

a Bluetooth-ready cell phone. Registering is a one-time process and required

only for the  rst connection with the cell phone. The BT Drive Free 414 can

be registered with up to eight cell phones and be connected simultaneously

with two cell phones.

NFC smart pairing

The NFC smart pairing procedure is available for BT Drive Free 414 to make

the pairing much simply and quickly.

Please ensure that your mobile phone's OS version is Android 4.1, Windows 8,

Blackberry 7.0 or upper. The NFC sensor usually locates at the back of phone.

– Please enable the NFC function in the setting menu of your phone  rst.

– Unlock your phone's screen to enable NFC detection, and touch the NFC

sensor area of BT Drive Free 414 to the back side of mobile phone. The

mobile phone will emit tone prompt if detect the speaker closing, and

the BT Drive Free 414 will turn on and enter pairing mode automatically.

NFC sensor

02_BTDriveFree414_gb.indd 20-2102_BTDriveFree414_gb.indd 20-21 19.11.14 11:4219.11.14 11:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt BT DRIVE FREE 414 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info