Bedienungsanleitung Blaupunkt Camper 690 DAB (Seite 25 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch)

790547

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

DEUTSCHEN

Radio mode

Start radio mode

In the main menu, press the  Radio  button.

The radio playback menu is displayed.

Select memory bank

Dierent memory banks and wavebands are available.

Up to 6 stations can be stored in each memory bank.

Press the   button repeatedly until the desired

memory bank is displayed.

FM1 FM2 FM3 AM1 AM2 FM1

Tuning into a station

Tuning into stations manually

Briey press the   or   button once or

several times to change the frequency in increments.

Enter broadcast frequency directly

If the frequency of the desired stations is known, it can

be entered directly via the touchscreen.

Press the   button to display additional

operating options.

Press the   button.

A numeric keypad is displayed for the frequency

input.

Enter the frequency of the desired station with the

numeric keypad.

Press the  OK  button.

The radio playback menu is displayed, the station of

the frequency entered is played back.

Starting station seek tuning

Press the   or   button for approx. 2

seconds to start station seek tuning.

The radio tunes into the next receivable station.

Note:

For the reception area Europe: In the FM waveband,

only trac information stations are tuned into if the

priority for trac information is switched on.

Storing stations manually

Select the desired memory bank with the  

button.

Set the desired station.

Press one of the memory buttons  P1  -  P6  for

approx. 2 seconds to store the current station at the

button.

The station is stored.

Storing stations automatically

(Travelstore)

With Travelstore, you can automatically search for and

store the 6 FM stations oering the strongest reception

in the region in the current memory bank. Any previously

stored stations in this memory bank are deleted in the

process.

Select a memory band.

Press the [ ] button to display additional

operationg options.

Press the [ TS ] button.

The tuner starts the automatic station seek tuning.

After the storing is completed, the radio plays the

station at memory location 1 of the previously

selected memory band.

Note:

For the Erurope reception area: If trac information

is switched-on, only trac informations are stored.

Scanning stations

You can use the scan function to play all the receivable

stations of the current waveband for a few seconds.

Press the   button.

The seek tuning searches for stations in the current

waveband. Each receivable station is played for a few

seconds in the process.

Pressing the [ ] button again selects the currently

scanned station and plays it back.

Adjusting the seek tuning sensitivity

The seek tuning sensitivity decides whether the

automatic station seek tuning nds only strong stations

or also weaker stations that may be noisy.

Press the  DX / LO  button to adjust the sensitivity of

station seek tuning.

If Local is displayed, only stations with a strong signal

are found during seek tuning.

If Distance is displayed, stations with a strong and

weak signal are found during seek tuning.

Radio mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Camper 690 DAB Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info