Bedienungsanleitung Blaupunkt Concept Pro II (Seite 22 von 264) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

614597

Zoom out

Zoom in

Vorherige Seite

1/264

Nächste Seite

Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation

Declaration of conformity

The Blaupunkt Embedded Systems GmbH de-

clares that the car sound system Birmingham

2012 complies with the basic requirements and

the other relevant regulations of the directive

2004/108/EC.

The declaration of conformity can be found on the

Internet under www.blaupunkt.com.

Cleaning notes

Solvents, cleaning and scouring agents as well as

dashboard spray and plastics care product may

contain ingredients that will damage the surface

of the car sound system.

Use only a dry or slightly moistened cloth for

cleaning the car sound system.

Disposal notes

Do not dispose of your old unit in the house-

hold trash!

Use the return and collection systems available to

dispose of the old device.

Scope of delivery

The scope of delivery includes:

1 Car sound system

1 Operating/installation instructions

1 Support frame

2 Disassembly tools

Optional equipment

(not part of the scope of delivery)

Use only accessories approved by Blaupunkt.

Information is available from your Blaupunkt

specialised dealer or on the Internet under

www.blaupunkt.com.

Placing the device in operation

Code protection

This car sound system is protected against theft

with a four-digit code number. You can specify

that the code number must be entered after every

interruption of the power supply from the vehicle

battery. With activated code query and without

this code number, the car sound system is useless

to a thief.

Notes:

• The code query is set to inactive at the

factory, but it can be activated (see the

chapter "User settings", section "Making

settings in the "VARIOUS" menu", menu

item "SEC CODE").

• The default setting of the code number is

"0000". The code number can be changed

(see the chapter "User settings", section

"Making settings in the "VARIOUS" menu",

menu item "CODE SET").

Entering the code number after a voltage

interruption

If the code query is activated, the four-digit code

number must be re-entered every time the device

is disconnected from the vehicle system voltage

(e.g. removal of the battery for repairs).

For each digit of the code number:

쏅 Press the

/ button

to set the current

digit.

쏅 Press the

button

to con rm.

Note:

When entering the code, you may return to a

previous digit by pressing the

button

After setting and con rming the fourth digit, the

car sound system is switched on.

Note:

If you enter an incorrect code number, "CODE

ERR" is brie y displayed and the device is

blocked for 99 seconds. Afterwards you can

retry the entry.

02_Birmingham2012_gb.indd 2202_Birmingham2012_gb.indd 22 07.08.12 10:5607.08.12 10:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Concept Pro II Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info