26
HIGH EQ Equalizer setting used to
select and adjust the level
of the upper frequency
area. Refer to “Equalizer
setting”.
HICUT Reduces interference dur-
ing poor reception by “cut-
ting” the high levels.
Settings: NO HICUT or HI-
CUT 1, 2, or 3 (3 = most
drastic cut of high levels).
LO-DX Changes the sensitivity of
the station search.
LO indicates reception of
close stations.
DX indicates reception of
distant stations.
Select LO 3 if you wish to
receive strong close sta-
tions and DX 1 if you wish
to receive weak distant
stations.
LOW EQ Equalizer setting.
To select and adjust the
level of the low frequency
area. Refer to “Equalizer
setting”.
LOUDNESS Loudness of the high and
low tones at low volume
levels adjusted to the hu-
man ear.
LOUD 1 - slight level in-
crease
LOUD 6 - highest level in-
crease
MUTE LEVEL Used to quickly reduce the
volume level with the push
of a button. The resulting
level can be programmed.
PEAK PEAK ON : Display of the
sound signal volume
range.
PEAK OFF: Static display
of the sound volume.
SCANTIME This function sets the scan
time (5-20 sec.) for radio
and CD during scan opera-
tions.
SHARX Used to activate the auto-
matic setting of ZF band-
widths. Set to SHARX ON
when reception area con-
tains many stations to
avoid to the extent possi-
ble interference from adja-
cent stations.
STEREO/MO Used to manually select
stereo/mono operation.
The display briefly indi-
cates the mode selected.
Each time the radio is
turned on, it is automatical-
ly set to STEREO.
T. ON VOL Allows you to determine
the setting of the initial vol-
ume level. If Vol. 0 is set,
the level last set is used.
Press the DSC key to store changed values
and to leave the DSC menu.
1.BA Alas,Flori,Neva168 gb 08.06.2000, 12:03 Uhr26
