Bedienungsanleitung Blaupunkt Granada RCR 127 (Seite 15 von 23) (Englisch)

614673

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Displaying the selected programme

type

• Press << or >>.

The programme type selected last will be

displayed briefly.

Selecting a programme type

a) Using the preset buttons

If PTY is switched on, you can use the

preset buttons 1-6 to select the pro-

gramme types stored at the factory.

• Press one of the presets 1-6.

The selected programme type will be

displayed for 2 seconds.

If you wish to listen to a station with

this PTY,

• press

/ to start seek tuning.

If the system is unable to find a station of-

fering the selected programme type, the dis-

play will show “NO PTY” and a beep tone

will sound. The station received before start-

ing seek tuning will be tuned in.

You can assign different programme types

to each preset position. Please refer to next

section on “Storing programme types”.

b) Using the << >> buttons of the rocker

switch

If PTY is switched on, you can select a

programme type using buttons << >>.

• Press << or >>; the programme

type selected last will be displayed

for 3 seconds.

• During this period press >> (for-

wards) or << (backwards) to select

the desired type.

• Press << or >> as many times as

required.

If you wish to listen to a station offering

the selected PTY,

• press

/ to start the seek tuning.

If the system is unable to find a station of-

fering the selected programme type, the dis-

play will show “NO PTY” and a beep tone

will sound. The station received before start-

ing seek tuning will be tuned in.

Storing programme types

At the factory, one programme type was

assigned to each of the preset buttons 1-6.

If desired, you can also store other availa-

ble programme types.

To do so, make sure that “PTY” lights up in

the display.

• If necessary, press the PTY button to

switch on the function.

• Select a programme type using but-

tons << >> and

• hold down the desired preset button

(1-6) until you hear a beep.

Now the selected programme type can be

recalled by pressing this preset. For this, the

PTY function must be active.

Scanning stations with PTY-SCAN

Important: “PTY” must appear in the display.

• Press the SCA button.

All of the received stations offering the se-

lected programme type will be scanned.

To switch off SCAN:

• Press SCA once again.

PTY priority

Situation:

PTY is switched on and lights up in the dis-

play.

No station offering the selected programme

type can be currently received (neither with

seek tuning nor with scan).

The set will switch back to the previous sta-

tion.

As soon as a programme with the PTY code

selected can be received within the broad-

cast network, the unit will switch over to the

corresponding station for the duration of the

programme.

Grana/Mala RCR127 gb® 02.05.2002, 13:06 Uhr35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Granada RCR 127 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Granada RCR 127

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info