Bedienungsanleitung Blaupunkt lausanne rd 148 (Seite 15 von 28) (Englisch)

165693

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

All of the stored stations on the selected

waveband will be scanned one after the oth-

er. In the display “SCAN” will alternate with

the flashing station name or frequency.

To select a scanned station and switch

off Preset Scan:

• Press SC briefly.

Scanning stations with Radio

Scan

You can also scan through all of the sta-

tions in your reception area.

To start the Scan function:

• Press SC briefly.

The scanned frequency or the station name

will start flashing in the display.

During the actual scanning process “AM-

SCAN” or “FM-SCAN” will appear in the dis-

play.

To select a scanned station and switch

off the Radio-Scan function:

• Press SC or the seek tuning rocker

switch briefly.

If no station is selected, the scan function

will switch off automatically after the frequen-

cy band has run through completely. The

radio will tune into the station selected be-

fore the scan started.

Changing the scan time

The scan time can be selected from between

5 to a maximum of 30 seconds.

If you would like to alter the scan time,

please refer to the section on “DSC program-

ming - SCANTIME”.

Selecting the seek tuning sensi-

tivity

You can alter the automatic seek tuning

sensitivity.

If “lo” is displayed, the radio will only pick up

strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also

pick up weaker, more distant stations (high

sensitivity).

If you would like to alter the sensitivity level

please refer to the section on “DSC program-

ming – LO-DX”).

Switching from stereo to mono

(FM)

Using the DSC menu you can switch from

stereo to mono reception. If reception is

poor, you may get better sound quality by

switching to mono. When the radio is

switched on, it automatically selects stereo

reception.

As reception deteriorates, the radio will grad-

ually switch to mono.

If you would like to switch to mono recep-

tion manually, please refer to the section on

“DSC programming – STEREO/MONO”.

The display will briefly indicate the mode

selected.

PTY - Programme Type

PTY is an RDS service which an increasing

number of more broadcasting stations have

begun to offer. This feature allows you to

select FM stations according to their pro-

gramme type. After you have chosen the

PTY of your preference, the corresponding

stations can be selected either by seek tun-

ing or using the scan function.

Switching PTY on/off

• Press PTY.

When the function is active, the programme

type selected last will briefly appear in the

display. “PTY” will appear permanently in the

lower right corner of the display panel.

Lausa/Neva RD 148 gb® 21.05.2002, 17:16 Uhr41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt lausanne rd 148 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt lausanne rd 148

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info