Bedienungsanleitung Blaupunkt London RDM104 (Seite 9 von 26) (Englisch)

614678

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

London RDM 104

Adjusting the balance and fader

You can alter the volume relationship bet-

ween the loudspeakers on the left and right

(balance).

If you have connected four loudspeakers to

this system, you can also regulate the volu-

me relationship for front and rear (fader).

Activate the balance and fader function with

the AUD button.

• Press the AUD button twice.

Either BAL (balance) or FAD (fader) and a

number between -9 and +9 will appear in the

display.

In order to adjust the balance (right/left)

• press the rocker switch <</>>.

In order to adjust the fader (front/rear)

• press the rocker switch

/ .

The number in the display will change accor-

dingly between -9 and +9. It will automatically

stop at 0 (same volume relationship between

left and right or front and rear).

Finish making the new setting by pressing

the AUD button; otherwise the display will

return to radio or CD mode approximately 8

seconds after the last adjustment has been

made.

The radio will switch on and after one hour it

will switch off again automatically.

You can switch the radio on again for one

hour as often as you like.

“Beep” sound after pressing a

button

Functions which require you to press any

button for longer than 2 seconds to store the

information can be confirmed acoustically by

a beep. The factory preset volume of the

beep can be adjusted in DSC mode under

BEEP using the rocker switch <</>>. You

can store different values for this setting

separately on KeyCard 1 and 2.

Adjusting the volume

To adjust the volume

• press the VOL+ button to increase or

the VOL- button to decrease the volu-

me.

The display ranges from 0 to +63.

If you have set a relatively loud volume and

would like to reduce it immediately,

• press the -dB button. MUTE will then

appear in the display.

If you want to reset the original volume, then

• press the -dB button again briefly or the

VOL+ button.

In order to alter the MUTE value (display

MUTE),

• first press the VOL- button.

• Set the desired volume using either the

VOL+ or the VOL- button.

In order to store this new setting

• press the -dB button for longer than 2

seconds.

After a short period the display will switch to

either radio or CD mode once again.

Adjusting the basic volume

You can program your radio so that it will

switch on at a certain volume.

Use the VOL FIX function in the DSC mode

(Direct Software Control).

• Press the DSC button and then the

rocker switch

VOL FIX will appear in the display.

• Set the desired volume using the rok-

ker switch <</>>.

In order to store this setting

• press the DSC button.

The radio will switch back to the original

volume setting first.

Turn it off and on again once to obtain the

new setting.

You can store different values for this setting

separately on KeyCard 1 and 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt London RDM104 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt London RDM104

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info