Bedienungsanleitung Blaupunkt London RDM104 (Seite 13 von 26) (Englisch)

614678

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

London RDM 104

The station button number and, for FM the

memory level, will flash in the display.

Depending on which memory level has been

activated for FM, all of the stations in either I,

II or the Travelstore T level will be scanned.

Unassigned station buttons will be skipped

over.

If you would like to listen to the station cur-

rently being scanned,

• then just press the PS/MIX button once

more.

Scanning stations with Radio

Scan

You can scan all of the stations in your

reception range on any one of the frequency

ranges one after the other.

You can set the playing time from 5 to 30

seconds (refer to the section on Pro-

gramming with DSC-SCANTIME).

You can store different values for this setting

separately on KeyCard 1 and 2.

To scan

• press the PS/MIX for longer than 2 se-

conds.

The radio will play all of the stations in your

current reception range one after the other.

Either the frequency or the station symbol will

flash in the display.

• Select a station with the rocker switch

(automatically with

/ or manually

with <</>>).

• Press the desired station button until

the radio switches to mute briefly and

you hear a beep or the radio switches

on to playback once again (in approxi-

mately 2 seconds).

Now the station has been stored. The display

will indicate which button was pressed.

Note:

If you should try to store a station which has

already been stored, then the corresponding

station button and, for FM the memory level,

will flash in the display.

Automatically storing the stron-

gest stations with Travelstore

You can store the six stations with the stron-

gest signals sorted according to their signal

strength in your current reception area auto-

matically. This function is particularly conve-

nient on longer trips.

• Press the FM

T button for at least 2 se-

conds.

The radio will search for the strongest FM

station signals and store them in the memory

level T (Travelstore). When this process has

been completed, the radio will tune in the

strongest station.

Stations can also be stored manually in Tra-

velstore if desired. If there are fewer than 6

stations, then dashes will appear in the dis-

play for the unassigned buttons.

Retrieving stored stations

You can retrieve stored stations at the touch

of a button.

• Select the frequency range by pressing

T and the memory level or the fre-

quency range M•L.

• Press the corresponding station button

briefly to retrieve the station.

Scanning stored stations with

Preset Scan (PS)

You can have all of the stations stored in one

frequency range played briefly by using the

Preset Scan feature. You can set the playing

time from 5 to 30 seconds (refer to the section

on Programming with DSC-SCANTIME).

To scan

• press the PS/MIX button briefly.

All of the stations stored in that frequency

range will be played briefly one after the

other.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt London RDM104 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt London RDM104

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info