Bedienungsanleitung Blaupunkt MB10PA10 (Seite 7 von 102) (Englisch, Polnisch)

698501

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Power connection

Please check if the power source correspond to the rating voltage spec, which locates on the panel of unit. If it does not

matching, please consult to your dealer or service center.

Insert the female terminal of power cord into the AC outlet, and then connect the power plug with the wall-mount socket in

order to get the power source. Then switch on the main power button to turn on the display screen, which means the power

connection is succeed now.

Remote control battery installation

Open up the battery door and insert 2 x AAA dry battery into the compartment; please make sure the polarity of battery will

aim and correspond to the positive and negative silkscreen-printed symbol in the compartment. Then close the battery door.

Notes:

a. The best working distance of remote control is within 5 meters without any obstacle in between. Please aim to the remote

control sensor locates on the front of unit during operation.

b. The sensitivity of remote control will become weak when the battery power exhausted. Please replace it with fresh one for

operation.

c. Please take out the battery in case of none-operation in a long time.

d. Please dispose the battery in an environment friendly way. Please reference the local government requirement for the

detail.

General operation

1. Power on/off: switch the main power button on the panel can turn on or off the unit; you also can get standby on/off by

press power button from remote control.

2. Play source selection：press the MODE button on the control panel or remote control can switch the play source between

FM/Bluetooth/Line in/USB/SD in cycle.

3. Volume adjustment: Turn the main volume knob on the panel can increase or decrease the main output volume level. You

can also adjust the volume in small step by press the VOL +/- button from remote control, but the remote control adjusted max

volume level is limited by main volume setting level.

4. Treble & bass adjustment: Turn the treble/bass knob on the panel can adjust the output sound level.

5. Sound silence: press the MUTE from remote control can make the sound in silence; press it again to resume the sound

output.

6. Preset EQ: Press the EQ button from remote control can switch the EQ between Normal ,Rock, POP, Classic, Jazz, News.(

Function only available in USB/SD and Bluetooth mode)

7. Play/pause: press the button to pause the music, and press it again to resume the playback in Bluetooth/USB/SD mode.

8. Repeat: press the button to switch the music playback in repeat one/random/repeat all mode.

9. Power and overload: The power LED indicator will light on when the power connection is successful. The clip red color LED

will flare in case of overload and detected. This occurs is in order to protect your speaker. Please reduce the volume level in

order to prevent serious damage to speaker. (Power clip indicator only available in PA serie

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt MB10PA10 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info