Bedienungsanleitung Blaupunkt montana rdm 169 (Seite 8 von 30) (Englisch)

165716

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

9 AUD

Use this key to activate the menu for

tone control.

Treble and bass adjustment

Press “AUD” once briefly: “BASS” will

appear in the display and now you ad-

just this setting as desired by pressing

the rocker switch to the left or the right.

Use the up/down rocker switch keys to

set the treble. “TREBLE” will then ap-

pear in the display.

Setting the Balance (left/right) and

the Fader (front/rear):

Press “AUD” twice briefly.

Now use the up/down rocker switch to

adjust the volume between the front

and the rear speakers. “FADER” will

appear in the display.

Use the left/right rocker switch keys to

adjust the volume between the left and

right speakers. “BALANCE” will appear

in the display.

The selected values will appear in the

display. The last setting is stored auto-

matically.

Switch AUD off by pressing the button

again briefly.

If you do not make any adjustments to

the tone within 8 seconds, the AUD

mode will quit automatically.

LD - Loudness

Loudness boosts the bass frequency

at low volume.

Loudness on/off: Press AUD until you

hear a beep.

: DSC (Direct Software Control)

Using “DSC” you can adjust pro-

grammable basic settings to suit your

own personal preferences.

Refer to the section on “DSC pro-

gramming” for more information.

; Clock display

When the unit is switched on press

“DIS” briefly and the current time will

appear in the display for approximately

8 seconds.

Additional function for clock display:

Press and hold “DIS” until you hear a

beep to display the time permanently.

If you activate another function, the

time will disappear from the display for

approximately 8 seconds.

< Preset buttons 1 to 6

Radio mode

You can store up to six stations in

each memory bank (I, II, and “T”).

On MW and LW you can also store six

stations each.

Storing stations

Tune the radio into the station you

would like to store. Press the preset

button on which you want to store this

station (radio will switch to mute) and

hold it down until the radio becomes

audible again and you hear a beep.

Recalling stored stations

Select the waveband and, on FM the

memory bank (“I”!, “II”, or “T”) as well.

Then press the corresponding preset

button 1-6 briefly to listen to the station

stored there.

Additional function for the station

preset buttons

Storing and recalling the PTY program

type.

When PTY is active (“PTY” will appear

in the display), then you can store and

recall a program type (e.g. rock, pop,

classical, news, etc.) on each for the

station preset buttons for the FM wave-

band.

CD mode

3/ -Pause

Press the station preset button marked

to interrupt CD playback. “PAU-

BA AcaBiaMonSevRDM168/169gb® 28.05.2002, 15:48 Uhr36

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt montana rdm 169 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt montana rdm 169

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info