Bedienungsanleitung Blaupunkt montana rdm 169 (Seite 17 von 30) (Englisch)

165716

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

b) Using the <</>> buttons on the rocker

switch

When “PTY” is switched on, you can select

a programme type using buttons <</>>.

• Press << or >>; the programme type

selected last will be displayed for 3 se-

conds.

• During this period press >> (forwards)

or << (backwards) to select the desired

type.

• Press << or >> as many times as re-

quired.

• If you would like to listen to a station

with the selected PTY, press

/ to

start the seek tuning function.

If the radio is unable to find a station offe-

ring the selected programme type, the dis-

play will show “NO PTY” and a beep will be

emitted. The radio will select the station

which was tuned into before seek tuning was

activated.

Storing programme types

Each of the preset buttons 1-6 has been

assigned one programme type at the facto-

ry.

If desired, you can also replace these with

other available programme types.

To do so, make sure that “PTY” lights up in

the display.

• If necessary, press the “PTY” button to

switch on the function.

• Select a programme type using but-

tons <</>> and hold down the desired

preset button (1-6) until you hear a

beep.

Now the selected programme type can be

recalled by pressing this preset as long as

“PTY” lights up in the display.

Scanning stations with PTY

SCAN

Important: “PTY” must appear in the display.

• Press “SC”.

All of the stations in your current reception

area offering the selected programme type

will be scanned.

To switch off PTY-SCAN:

• Press “SC” or the rocker switch again.

PTY priority

Situation:

PTY is switched on and lights up in the dis-

play.

No station offering the selected programme

type can be found currently in your recepti-

on range (with seek tuning or scan).

The set will switch back to the station pre-

viously tuned into.

As soon as it is possible to receive a pro-

gramme in the broadcast network with the

PTY selected, the radio will switch over to

the corresponding station for the duration

of the programme.

Example:

- Station playing: NDR3.

- “PTY” lights up in the display.

- Programme type “POP” selected.

- Seek tuning is started.

-No station with “PTY-POP” can be found.

- The display shows “NO PTY” and

- automatically switches back to NDR3.

- NDR2 airs a “PTY-POP” programme.

- The radio will switch to the linked stati

on NDR2 for the duration of the “POP”

programme.

During CD operation, the set will also switch

to the radio programme if the selected PTY

becomes available within the broadcast net-

work.

After the PTY programme has ended the

system will switch back to the previous mode

(radio or CD).

Note:

As already mentioned, these functions are

only supported by a limited number of RDS

stations at the present time.

BA AcaBiaMonSevRDM168/169gb® 28.05.2002, 15:48 Uhr45

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt montana rdm 169 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt montana rdm 169

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info