168650
42
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
98
Starting recording
To record a DAB programme onto an SD/
MMC,
switch to DAB mode and select the pro-
gramme that you want to record. For
further details on this, please read the
“DAB mode” chapter.
Press the REC•DEL button 9 when
you want to start recording.
Notes:
You cannot start recording during
the fi rst 15 seconds after switching
to DAB mode or after switching on
the radio with DAB mode activated.
This also applies if you pressed the
REC•DEL button 9 and the display
shows “RECORDING”.
To avoid damaging the SD/MMC, you
should never start the engine whilst
recording. Starting the engine might
cause the voltage of the vehicle’s
electrical system to drop, which could
permanently damage the SD/MMC.
The automatic DAB-FM switching fea-
ture is deactivated whilst recording is
taking place. The DAB programme re-
mains tuned during recording, even if
the reception quality deteriorates.
Recording starts and “RECORDING” ap-
pears on the display for approx. 2 seconds.
If there is insuffi cient space available on the
card, “CARD FULL” appears on the display
for approx. 2 seconds. In this case, delete
items from the SD/MMC (see “Deleting re-
cordings” following below) or insert a dif-
ferent SD/MMC.
The fi le created during recording is given
a name as follows:
ddhhmmss.mp3. “dd” stands for the day
the recording was made, “hh” stands for the
hour recording was started, “mm” stands
for minutes and “ss” for seconds.
The device creates the “DAB_DIR” direc-
tory on the SD/MMC to store the recorded
les.
Telephone/navigation during recording
Telephone calls or voice output from a navi-
gation system do not affect recording. The
DAB programme continues to be recorded
in the background during a telephone call or
voice output.
Stopping recording
If you want to stop recording,
briefl y press the REC•DEL button 9.
“RECORDING STOPPED” appears on the
display for approx. two seconds.
Recording is stopped automatically in the
following cases:
If the storage space on the SD/MMC
lls completely during recording. In
this case, “CARD FULL” appears on the
display.
If you switch programmes during the
recording.
If a problem arises with communica-
tions between the SD/MMC and the
device, you will see “MMC ERROR” ap-
pear on the display and recording is
then stopped.
If you deactivate DAB mode whilst re-
cording, e.g. by switching to CD mode
or radio mode.
SD/MMC mode
02_NashvilleDAB47_gb.indd 9802_NashvilleDAB47_gb.indd 98 20.07.2007 11:48:24 Uhr20.07.2007 11:48:24 Uhr
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt nashville dab47 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blaupunkt nashville dab47

Blaupunkt nashville dab47 Bedienungsanleitung - Deutsch - 60 seiten

Blaupunkt nashville dab47 Installationsanweisung - Deutsch, Englisch - 13 seiten

Blaupunkt nashville dab47 Bedienungsanleitung - Holländisch - 59 seiten

Blaupunkt nashville dab47 Installationsanweisung - Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info