Bedienungsanleitung Blaupunkt Pasadena CD 71 (Seite 15 von 33) (Englisch)

614788

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

The current value of the sensitivity is shown

on the display. “SENS 6” indicates the maxi-

mum sensitivity for the reception of distant

transmitters, and “SENS 1” indicates the low-

est sensitivity.

➮ Adjust the desired sensitivity with the

key, 7.

➮ Press the OK button, 5 or the MENU

button, 8, to leave the menu. The set-

tings are then saved.

Saving a station

Saving a station manually

➮ Choose the desired memory level from

FM I, FM II, FMT or one of the other

wavebands, MW (AM) or LW (AMT).

➮ Tune in the desired station as described

under “Setting the station”.

➮ Hold down the softkey, 4, indicating

the station “ST1” - “ST6” in which the

station is to be stored for longer than

two seconds.

Saving a station automatically

(Travelstore)

You can also save the six strongest stations

in the area automatically (FM only).

This is done in the FMT memory level.

Note:

Any stations previously saved on this level will

be deleted.

In order to use the Travelstore function

➮ press the TUNE button, >, when the

radio is operating.

The radio function menu is shown on the dis-

play.

➮ Press the softkey, 4, indicating “TS”.

Storing starts. “T-STORE” appears in the dis-

play. When the procedure is complete, the

station in memory location one on the FMT

level is played.

Going to a preset station

➮ Select the memory level or waveband.

➮ Press the softkey, 4, indicating from

“ST1” to “ST6” for the desired station.

Scanning through stations

Scanning through available stations

(radio SCAN)

You can listen to short samples from all the

stations that can currently be received. The

length of the samples can be set, in the menu,

at between 5 and 30 seconds.

Starting radio SCAN

To start the radio scan

➮ press the TUNE button, >, when the

radio is operating.

The radio function menu is shown on the dis-

play.

➮ Press the softkey, 4, indicating “SCA”.

The scanning process starts. “SCAN” is

shown on the display for a short time, after

which the current station name or the frequen-

cy is displayed, flashing.

Scanning through the preset stations

You can listen to short samples from all the

stations saved on the various memory levels

that can currently be received. The length of

the samples can be set, in the menu, to be-

tween 5 and 30 seconds.

Starting preset SCAN

To start the preset scan

➮ press the TUNE button, >, when the

radio is operating.

The radio function menu is shown on the dis-

play.

➮ Hold down the softkey, 4, indicating

“SCA” for longer than one second.

The scanning process starts. “SCAN” is

shown on the display for a short time. The

memory levels are scanned one after anoth-

RADIO OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Pasadena CD 71 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Pasadena CD 71

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info