Bedienungsanleitung Blaupunkt PS10DB (Seite 8 von 90) (Englisch, Polnisch)

698508

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

3. Volume adjustment: Turn the main volume knob on the top panel, or press VOL+/- button from remote control can increase

or decrease the output volume level.

4. Treble & bass adjustment: push up or down the treble/bass pin on the top panel can adjust the output sound level.

5. Sound silence: press the MUTE from top panel or remote control can make the sound in silence; press it again to resume the

sound output.

6. Preset EQ: press the relative button from remote control can switch the EQ between

Jazz/Classic/Flat/POP/ROCK/Country(available in USB/SD mode only).

7. Play/pause: press the button to pause the music, and press it again to resume the playback in Bluetooth/USB mode.

8. Repeat & Random: press the button to switch the music playback in repeat one/repeat all/off mode; press random button

for random on/off playback in USB/SD mode.

9. Disco light: press the light button repeatedly can switch the disco light between 8 type effect, and turn off light.

10. Reset: press the reset button from remote control to set up the unit in factory default mode.

FM radio operation

Before start the FM radio listening, please try to move the unit next to the window or other location in order to better FM

reception. Insert the included FM wire antenna into the FM antenna socket which locates on rear panel of unit, and full extent

the antenna for reception.

1. Auto scan and preset radio station (All-in-one): short press the play/pause button on top panel, or press the search button

from remote control to auto scan and save the available radio station. The unit will auto play the first preset station after

finished scanning. ( max supported preset station:40)

2. Preset station picking up: in radio mode, press the next/previous button on top panel or remote control to pick up and play

the last and next preset station.

3. Manual tune: short press the FF+/- button from remote control to adjust the station frequency as per 0.1MHz; press and hold

the previous/next or FF+/- button 2 seconds to scan the available station in upward or downward frequency, and auto play the

station.

USB/SD playback operation

The product includes USB/SD playback function which can decode and playback the music from a USB/SD storage device.

Before start the operation, please copy the MP3/WMA format music into the device; and insert the device into the unit first,

because the USB/SD mode is only available when the device was plugged on unit successfully. Then the unit will detect and

play the inside MP3/WMA music automatically.

Track selection: short press the next/previous button to select next and previous track; press and hold the button for fast-

forwarding and rewinding the playing music, and resume to normal playback after release the button.

In USB/SD mode, you can achieve the play/pause, mute, repeat, EQ, treble/bass stop function etc. Please reference the

operation from the general operation part on this manual.

Notes:

a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent

sound due to audio data loss during transfer.

b. Decode and playback all MP3/WMA format music is not guaranteed.

c. The max supported storage device is 32GB.

d. Some different device and brand may take a little long time to playback; please kindly note this is not mal-function.

Bluetooth operation

This product includes Bluetooth function which can wireless playback the music from other Bluetooth device (like smart

phone, tablet etc).

1. Press the source button repeatedly to enter Bluetooth mode, and the Bluetooth symbol will flare on display which means the

unit is ready to pair.

2. Enable the Bluetooth function on your device, and search the available device (please reference your device manual for

operation), then check the available Bluetooth device on the list. Select “ BP PS10DB” for pairing, and the Bluetooth symbol will

stable on display after paired successful.

3. Select and play the music from your Bluetooth device, then the sound will come out from the speaker

4. Press the previous/next button can select last and next track during playing.

5. In Bluetooth mode, you can achieve play/pause, mute, treble and bass adjustment etc. function. Please reference the

operation from the general operation part on this manual.

Notices:

a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.

b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.

c. The unit only can pair and work with one Bluetooth device in one time.

d. In case of an incoming phone call during Bluetooth playback; the music will stop temporary, and resume to playback after

end the phone call.

e. Press the pairing button from remote control can quit the current Bluetooth device connect and start pair with other device.

Line in/AUX IN/MP3 link operation

In order to wire connection and playback the music with other player or amplifier, please follow up below operation.

Using the audio cable (include)connect the AUX IN jack on the rear panel of unit, and the another terminal connect with line-

out or headphone jack of outsourcing player like MP3, CD,DVD, Mixer etc. audio device. Select the music and play it on the

outsourcing player, then the sound will output from the speaker.

In line-in playback mode, the main control is on the outsourcing player side. But you also can control the volume, mute the

sound and adjust treble & bass etc. on the speaker side.

Blaupunkt PS10DB Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info