Bedienungsanleitung Blaupunkt RATK 750103 (Seite 16 von 24) (Deutsch, Englisch)

716236

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

•

MAINTENANCE

Before conducting any maintenance on the device, disconnect the mains plug.

Only those maintenance and fault elimination tasks described here may be carried out. Any other tasks must be completed by a

specialist. Only use original replacement parts. Only these replacement parts are designed and suitable for the device. Other

replacement parts will not only lead to an invalidation of the warranty, they may also endanger you and your environment.

DEVICE-SPECIFIC SAFETY INSTRUCTIONS

• Keep the handles dry and free of grease.

• Make sure to always wear personal protective clothing when operating.

• Make sure the connection cable is always kept out of the working range of the device. Make sure that cables always lead away

from the rear of the device.

• Make sure you are positioned ﬁrmly and with a natural stance when working with the device.

• Always hold the unit tightly with both hands.

• Before starting work, check the area for animal and objects. Remove all objects that may be blown away by the unit, or that

the thread may become caught on.

• Before starting work check the area and remove all objects which may damage the cutting mechanism.

• Always ensure suﬃcient distance to the cutting mechanism.

• In the vicinity of 15 m around the cutting area there should be no people or animal as they may be hurt by ﬂying objects.

• Only work with good light and visibility.

• Do not work above hip height! Do not bend forwards or lean over backwards!

• The clothing of the operator should be close-ﬁtting. Avoid wearing loosely ﬁtting clothing. Wear sturdy footwear and long

work trousers.

• Pay attention when walking backwards. Danger of stumbling!

• The cutting tool will continue to rotate even after the engine has been switched oﬀ.

• Risk of injury caused by the cutting blades! After pulling out a new thread, always keep the machine in the normal working

position before switching on.

• Ensure that the ventilation slots are kept free from dirt.

• Never mount metal cutting elements.

• Children should be supervised to ensure that they do not play with the device.

• If the power cable of this device is damaged, it may only be replaced by the manufacturer, their customer service operation,

or a similarly qualiﬁed person,in order to prevent risks.

• Remember that moving parts may also be located behind ventilation and venting slots.

• Symbols aﬃxed to your tools may not be removed or covered. Information on the device that is no longer legible must be

replaced immediately.

Read the operating manual before using the device

Be careful when handling the device! Observe all safety instructions in the instructions for use!

Disconnect the mains plug before all cleaning and maintenance work.

SYMBOLS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt RATK 750103 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info