Bedienungsanleitung Blaupunkt Rhodos CC25 (Seite 6 von 12) (Englisch)

614680

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Rhodos CC 25 gb

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

Restart following interruption of

power supply

(Code system switched on)

• Switch on the set.

“COD” will appear in the display.

• Briefly press preset button 1, “000” will

appear in the display.

• Enter the code number given in the

Blaupunkt car radio passport:

Preset button 1 only allows to choose

“0” or “1”. The first “0” will not be dis-

played.

Example: the code number is 0521.

- Press preset button 1 until “000” ap-

pears in the display.

- Press preset button 2 five times,

“500” appears in the display.

- Press preset button 3 twice, “520”

appears in the display.

- Press preset button 4 once, “521”

appears in the display.

• To confirm the code number:

Press the

upper part of the rocker

switch

Your car radio is now ready for operation.

If three dashes appear again in the display,

you have entered a wrong code number.

Now it is essential to enter the correct code

after the waiting period has elapsed (COD in

the display).

Anti-theft coding

The car radio comes standard with the code

system deactivated.

If the anti-theft coding system is on while the

power supply to the unit is interrupted (e.g.

theft, disconnecting the car battery), the set is

electronically blocked. Then it may only be

used again after the appropriate code num-

ber has been entered (see car radio pass-

port).

Wrong code number entered

It should not be possible for thieves to ascer-

tain the code number by trial-and-error. This

is why the set will be blocked for a certain

period of time, if an incorrect code number is

entered. In this case, “- - -” will appear in the

display.

This waiting time is 10 seconds after the first

three attempts, and 1 hour following subse-

quent attempts.

After 19 unsuccessful attempts, “OFF” will

appear in the display and the set can no

longer be restarted.

Note:

Keep you car radio passport with the code

number in a safe place in order to avoid

“unauthorized access” to your car radio.

If the power supply to the radio is interrupted

while the code system is switched on, you

need to know the right code number.

The radio will operate again as soon as you

have entered the right code number.

If you lose your radio passport and have

forgotten your code number, you will not be

able to restart the set after the power supply

has been interrupted. In this case, your radio

can only be reset in our central customer

service workshop or in one of our service

agencies abroad.

Switching the code system on

Precondition:

The radio must be connected to permanent

power.

In order to switch the code system on:

• Turn the radio off.

• Hold down the preset buttons 1 and 4

simultaneously.

• Turn the radio on.

“COD” briefly appears before the radio

begins to operate.

• Release preset buttons 1 and 4.

The code system is on.

“COD” will be briefly displayed each time the

radio is turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Rhodos CC25 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Rhodos CC25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info