Bedienungsanleitung Blaupunkt RNS 310 Skoda Amundsen (Seite 17 von 38) (Englisch)

445523

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Range selector key RADIO 15

– You can select the station stored on one of the station keys to

in the main menu RADIO by briefly pressing the desired station key.

Calling up available stations from the memory list

– Press the button and then the button and the func-

tion key .

– Select the desired radio station using the menu control button .

RDS function

– If you wish to switch the display of additional information to a radio

station on or off, press the button , the function is displayed in the

top right corner of the screen by the letter “i”.

RDS (“Radio Data System”) serves to transmit program identification and additional

services therefore also enabling automatic tracking of stations.

In the event of sufficiently satisfactory reception, the suitable RDS radio stations will

display the station name instead of the station frequency.

If a radio station sends additional information via the RDS function while a station

is being stored, it can occur that the name of the radio station is later displayed

incorrectly in the memory list. In this case, the stored station name can be restored

by selecting the desired radio station, wait until the correct station name is

displayed as radio text then press the menu control button and a pop-up

window is displayed on the screen.

Traffic information function TP

Switching traffic information TP (Traffic Program) on or off

– Press the function key in the RADIO mode.

– Briefly press on in the opening pop-up window to switch the

traffic information on or off.

The display “TP” in combination with a station name (e. g. in the station or memory

list), indicates a traffic information station.

Irrespective of which radio station is heard, an additional receiver part in the unit

ensures that a traffic information station can always be received as long as the traffic

information function is switched on.

The functionality of the function for the traffic information “TP” is displayed at the

top right in the screen.

If no traffic information station can be received because, for example, radio recep-

tion is interrupted in general, “No TP” will be displayed instead of “TP”. Remember

that car parks, tunnels, high buildings or mountains can interrupt the radio signal

up to the total loss of reception.

Incoming traffic announcement

If you wish to interrupt the transmission of the traffic announcement, press on the

function key in the pop-up window Traffic announcement. The traffic infor-

mation function remains available and a following traffic announcement is

replayed if a random source is switched on. Pressing the function key will

switch off the traffic information function permanently.

1 24

RADIO Freq. Band

FM/List

Station name stored

Extras

Cancel

TP off

s36c.b.book Page 15 Thursday, April 9, 2009 2:50 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt RNS 310 Skoda Amundsen Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info