Bedienungsanleitung Blaupunkt RVC701 (Seite 10 von 108) (Deutsch, Englisch, Polnisch)

698409

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

RVC701

B4. Press the power button to save the changes. Press the “PLAN” button to exit the schedule setting

mode.

NOTES:

1. In order for the cleaning schedule to function properly, it is necessary to program the robot's

internal time.

2. The robot will start cleaning at the scheduled time every day.

3. After turning the robot off with the main switch, the time and schedule settings will be reset.

4. To delete the schedule, set the time to 00:00.

3. Programming the schedule using the remote control

3a. Press and hold the “PLAN” button on the remote control for 5 seconds

3b. Use the arrow buttons to set the schedule time

3c. Press the “ON/OFF” button to confirm the schedule time. The robot's display will show the set time.

Note: by setting the time on the remote control, you set the start delay in relation to its system time.

Example: time indicated on the remote control is 01:30 AM, the robot's internal time: 08:00 AM, the

schedule will be set to 09:30 AM every day.

USING THE VIRTUAL WALL (MAGNETIC STRIP)

To reduce the robot's operating area, you can place the magnetic strip, which will create a virtual wall.

As the robot approaches the strip, it will recognise it, makes a turn or turns around. The strip can be

placed in the passageway between rooms or used to separate the device from cables or bowls for pets.

CONNECTING THE DEVICE WITH THE WIFI NETWORK AND APPLICATION

Note: The robot only uses a 2.4 GHz network. Make sure the router provides this connection.

Install the BlueBot APP on your phone. It is available from Google Play or Apple store. You can also scan

the following code to load the appropriate link:

Next, follow the instructions shown in the application:

1. Register a user account

2. Select the compatible model

3. Reset the vacuum cleaner connection parameters by pressing and holding the power button for 3

seconds

4. Connect the phone directly to the network generated by the robot named “RVC_xxxx”

5. The application will ask you to enter the name of the WiFi network and the network access password

6. If the robot establishes a network connection, a message will appear on the display saying “CONN”.

In case of an error message, repeat the connection procedure by entering the correct network

parameters.

The application allows you to control the basic functions of the robot and monitor its operation. The

application contains a detailed user manual for the application.

CLEANING AND MAINTENANCE

1. Emptying and cleaning the dust bin:

Pull out the bin. Remove the cover and the internal filter. Empty the bin.

The bin may be cleaned under running water (do not wash in a dishwasher or washing machine). Clean

the filter with a soft brush.

2. Cleaning the device body

Clean the device with a damp cloth, and then wipe it dry. Do not immerse the device in water.

Regularly remove any dirt that might block the air intake opening and sweeping brushes.

LIST OF MESSAGES:



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt RVC701 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info