613051
28
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
25
If more than one number is programmed the Control Panel will continue to dial the number(s)
until a recipient presses the third response key.
If no phone number is programmed, the Control Panel will not dial.
Call Acknowledgement
When the Control Panel makes Voice Report, there are 3 responses available for the recipient to
receive the call, by pressing 1, 0 or 9 key on his telephone set.
Press 1:
The Control Panel will open a one-way listen only channel for 2 minutes for you to listen
to what is happening on the other side.
During the last 20 seconds of the 2-minute period, the Control Panel will sound a beep to
remind the recipient. Press 1 again to extend another 2 minutes.
When the 2-minute period expires, the Control Panel will automatically hang up and dial
the next number.
Press 0:
The Control Panel will hang up.
The Control Panel will continue Alarming.
The Control Panel will dial the next number.
Press 9:
The Control Panel will hang up.
The Control Panel will stop alarming and stop dialling.
The panel will also stop reporting if 2 call recipients pressed 1 or 0 to acknowledge the report
If the call recipient hangs up the telephone without any acknowledgement, the Control Panel will
redial the telephone to retry the report for a maximum of 5 times.
Auto Redial
When only one telephone number is stored and the number is engaged, the Control Panel will
automatically redial up to 5 times with an interval of 80 sec. between each attempt.
When more than one telephone numbers are stored, the Control Panel will dial according to
priority order. If the number being dialled is engaged, it will try the next number. Each
number will be tried up to 5 times and the interval between each attempt is 20 sec.
The Control Panel will redial the telephone numbers for up to 3 cycles, 15 times maximum.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

blaupunkt-sa-2700-kit

Suche zurücksetzen

  • Wie kann ich in der. Alarmanlage Blaaupunkt SA 2700 Fehlerlanzeigen löschen? Eingereicht am 13-2-2023 12:11

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt SA 2700 Kit wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blaupunkt SA 2700 Kit

Blaupunkt SA 2700 Kit Bedienungsanleitung - Deutsch - 60 seiten

Blaupunkt SA 2700 Kit Bedienungsanleitung - Holländisch - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info