Bedienungsanleitung Blaupunkt San Francisco RDM 127 (Seite 11 von 32) (Englisch)

614918

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

• Press << or >>.

The display will switch to “CHANGE”.

• Push in the KeyCard. The card is re-

leased and put in the proper position

for being removed.

• Remove the first KeyCard and insert

the new one while “CHANGE” is still

being displayed.

After the display indication “READY” or

“LEARN KC”,

• press DSC.

Now you can also use the new KeyCard for

operating your unit.

A maximum of two cards can be used for

the set.

When trying to “train” a third one, the ac-

cess authorisation for the KeyCard not used

for the “training” process will be deleted

automatically.

Displaying the radio pass data

Using the KeyCard supplied with your set

you can have the radio pass data such as

the model name, product number (7 6 ...)

and serial number indicated on the display

panel.

Please refer to chapter “DSC programming

- READ KC”.

KeyCard theft protection system

This car radio is supplied with one KeyCard

as standard, though it can also be operated

with a second card.

If you have lost your KeyCard or if it was

damaged, you can buy a new one from your

specialised dealer.

When using two KeyCards, the settings

stored on the first card will be adopted. How-

ever, you can individually store the follow-

ing functions:

Preset button assignments, bass, treble,

balance and fader settings, Loudness, TA

(traffic announcement volume), beep vol-

ume.

In addition, the settings activated before

switching the radio off, such as the wave-

band, station, TA priority, AF, REG ON/OFF,

SCANTIME, seek tuning sensitivity and VOL

FIX will also remained stored.

This ensures that you will find your basic

settings re-adjusted automatically as soon

as you have inserted your KeyCard.

Putting the unit into operation

• Turn on the set.

Introduce the KeyCard into the slot

with the contact area showing up

(KeyCard tongue sticking out).

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD

ERR” will appear in the display. In this case

please do not make any further adjustments.

The system will switch off after approximate-

ly ten seconds.

When inserting another card type (e.g.

phone or credit card), the display will show

“WRONG KC” for approximately two sec-

onds.

Remove the wrong card and introduce the

correct KeyCard.

After the display indications “CARD ERR”

or “WRONG KC”:

• Press ON to turn on the set.

Removing the KeyCard

Never pull out the KeyCard directly!

• First, slightly push in the KeyCard.

This releases the card and puts it in the prop-

er position for being removed.

• Now you can pull it out.

“Training” a second KeyCard/

Replacing a KeyCard

While operating the unit with the first

KeyCard, you can “train” a second one to

be also used with the set:

• Insert the first KeyCard and turn on the

set.

• Press the DSC button and select

“LEARN KC” with

/ .

San Francisco gb® 29.05.2002, 12:15 Uhr41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt San Francisco RDM 127 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt San Francisco RDM 127

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info