614918
15
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Notice:
Should you tune in a station which has al-
ready been stored before on another mem-
ory bank, the corresponding preset button
and the memory bank will briefly flash in the
display.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
Press the FM
T button for two seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.
If desired, stations can also be stored man-
ually on the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
Select the waveband by pressing FM
T
or M•L. On FM, also choose the corre-
sponding memory bank by briefly
pressing the FMT button as many
times until the desired bank appears in
the display.
Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all wavebands.
Note that the Preset Scan function can only
be started if PTY is switched off (“PTY” does
not light up in the display).
Press the PTY button if required.
To start Preset Scan:
Press SC/MIX for approximately two
seconds.
All of the stored stations of the adjusted
waveband will be scanned one after the oth-
er. The memory bank and preset position of
the currently scanned station will flash in the
display.
To select a scanned station and switch
off Preset Scan:
Press SC/MIX briefly.
Scanning stations with
Radio-Scan
You can also scan all stations which can be
received.
To start the Scan function:
Press SC/MIX briefly.
The scanned frequency or the station name
will start flashing in the display. During the
actual scanning process “SCAN” will be dis-
played.
To select a scanned station and switch
off the Radio-Scan function:
Press SC/MIX briefly.
If no station is selected, the scan function
will be automatically switched off after the
frequency band has been run through com-
pletely. The unit will tune in the station lis-
tened to before starting the scan.
Changing the scan time
The scan time can be changed from be-
tween five to a maximum of 30 seconds.
Please refer to chapter “DSC programming
- SCANTIME”.
San Francisco gb® 29.05.2002, 12:15 Uhr45
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt San Francisco RDM 127 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blaupunkt San Francisco RDM 127

Blaupunkt San Francisco RDM 127 Bedienungsanleitung - Deutsch - 33 seiten

Blaupunkt San Francisco RDM 127 Bedienungsanleitung - Holländisch - 32 seiten

Blaupunkt San Francisco RDM 127 Bedienungsanleitung - Französisch - 33 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info