Bedienungsanleitung Blaupunkt San Francisco RDM 127 (Seite 24 von 32) (Englisch)

614918

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

DSA

Digital Signal Adaptation

With DSA, you can recall and tune in equa-

lizer functions and activate the dynamic dri-

ving noise covering function.

Overview of Equalizer functions

The HiFi reproduction in a car is affected,

for example, by the interior fittings (uphols-

tery, windows), loudspeaker positioning, etc.

With the integrated equalizer, you can tune

in nine frequency bands per channel: 60 Hz,

125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz,

4 kHz, 8 kHz, 16 kHz.

You can store and recall different settings

in five memory banks each (preset buttons

1 to 5):

With preset button 6, the corresponding

equalizer is deactivated.

For optimal acoustic control, the following

alternatives are available:

Self-calibrating equalizer

(HiFi calibration)

The set is equipped with a self-calibrating,

adaptive 9-band equalizer for four channels.

Four channels can be electronically calibra-

ted per memory bank (front left, front right,

rear left, rear right).

Manual equalizer

Separate equalizer adjustments can be per-

formed manually for front and rear per me-

mory bank.

Preset equalizer

(Default allocation of equalizer)

Permanent equalizer settings can be recal-

led with buttons 1 to 6 or with

/ / << >>.

1 ROCK, 2 DISCO, 3 JAZZ, 4 CLASSIC,

5 VOCAL, 6 P - EQ OFF

HiFi calibration

You can perform and store electronic cali-

bration for five different situations.

These calibrations are stored and recalled

with the buttons 1 to 5.

You can select the following situations, for

example:

1 For the driver only

2 For driver and front passenger

3 Front passenger

4 Passengers front and rear

5 Rear passengers only.

You deactivate the equalizer with button 6

(“P-EQ OFF” in the display.)

To calibrate, you have to fix the microphone

lead (microphone opening pointing down) to

the roof lining with adhesive tape.

The position of the microphone for situation

1 (driver alone) is directly on a level with the

driver’s head. For situation 2, the micropho-

ne is between the driver and the front pas-

senger, for situation 3 on a level with the

front passenger’s head, etc.

Start HiFi calibration

During the calibration process it is impor-

tant that the surroundings are really quiet.

Any outside noises will distort the readings.

The loudspeaker radiation should not be

impaired by any objects.

The system must be switched on.

• Position the microphone for the situati-

on to be programmed.

Incorrect calibrations result when the micro-

phone is wrongly positioned.

Depending on the vehicle and on the install-

tion position of the speakers, calibration may

be linear or with a bass boost. Try out which

setting you like more.

You can preselect with DNC. The following

stand for:

DNC-OFF - linear frequency response

DNC-LOW - slight bass boost

DNC-MID - medium bass boost

DNC-HIGH - stronger bass boost.

San Francisco gb® 29.05.2002, 12:15 Uhr54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt San Francisco RDM 127 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt San Francisco RDM 127

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info