Bedienungsanleitung Blaupunkt San Marino RCR 127 (Seite 8 von 19) (Englisch)

614675

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Antitheft protection

This car radio is supplied with inactive code

protection. In order to switch the security

coding system on, proceed as described on

the following pages.

If the coding system is active while the power

supply to the system is interrupted (e.g. theft,

disconnection of the car battery), the set will

be electronically blocked. In such a case it

can only be made operable again by enter-

ing the correct code number given in the car

radio pass.

Entry of a wrong code number

It should not be possible for a thief to find

out the correct code number by trial and er-

ror. This is why the set will be blocked for a

certain period of time after a wrong code

number has been entered. The display will

show “CODE ERR” and then “WAIT”.

After the first three unsuccessful attempts,

the system will shut down for 10 sec.; after

further attempts, the waiting time extends

to one hour.

After 19 unsuccessful attempts, the display

will show “OFF”. In this case you can no

longer restart the unit.

Note:

Keep your car radio pass with the code

number in a safe place in order to avoid “un-

authorised access” to your car radio.

Re-start following an interrup-

tion of the power supply

(coding system is activated)

• Turn on the radio.

The display shows “CODE”.

• Briefly press preset button 1; the dis-

play shows “0000”.

• Enter the code number given in the

Blaupunkt car radio pass:

Example: The code number is 2521.

- Press preset button 1 twice; the dis-

play shows “2000”.

- Press preset button 2 five times; the

display shows “2500”.

- Press preset button 3 twice; the dis-

play shows “2520”.

- Press preset button 4 once; the dis-

play shows “2521”.

• To confirm the code number:

Press the rocker switch >.

If you have entered the correct code, the

unit will now be ready for use.

However, if the display shows “CODE ERR”

and then “WAIT”, you have entered a wrong

number. The unit will switch off when the

waiting time has elapsed. Turn it on again

and re-enter the correct code.

If you switch off the set while it is blocked,

the waiting time will start to count from zero

again as soon as the radio is turned back on.

If the security code system is activated, the

unique code must be entered each time the

power supply was interrupted.

The radio will be operable again as soon as

you have entered the correct code.

If you have lost your radio pass and forgot-

ten the code number, your radio can only

be restarted by one of our authorised serv-

ice workshops. This is a chargeable serv-

ice.

Switching on security coding

To activate the coding system:

• Turn off the radio.

• Press and hold down preset buttons 1

and 4 simultaneously, and

• switch the set on.

“CODE” will appear.

• Release preset buttons 1 and 4.

• Enter the code number given in the

Blaupunkt car radio pass and confirm

your entry as described in “Restart ...”

Now the security coding system is active.

The display will briefly show “CODE” each

time the set is turned on.

Milano RCR127 gb® 24.05.2002, 11:13 Uhr24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt San Marino RCR 127 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt San Marino RCR 127

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info