Bedienungsanleitung Blaupunkt SERIES 945 (Seite 28 von 32) (Englisch)

614244

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Rear Seat Entertainment (RSE)

The device features audio and video outputs for the rear

area of the vehicle to which two external monitors and

headphones, e.g. via suitable jacks, can be connected.

The following sources are available for the Rear Seat

Entertainment:

• Disc

• USB RSE (rear side)

• A/V In 1

• A/V In 2

쏅 Select the desired source in the main menu and start

playback.

쏅 In the main menu (if necessary under Apps), select

the Rear Zone app.

쏅 Under Rear Zone, select the previously started source.

The playback now also takes place in the rear area

of the vehicle.

Note:

During the RSE playback, you can select a di erent

source for the front area of the vehicle in the main

menu. The RSE playback of the originally selected

source continues unimpeded.

쏅 To exit the RSE, select the Rear Zone app again and

tap on Rear O .

Showing device display on

external monitor

If the installation position of the device is not optimal for

viewing displays (e.g. for using the navigation), you can

output the device display on an external monitor.

쏅 In the main menu (if necessary under Apps), select

the Rear Zone app.

To switch the playback on an external monitor on or o ,

쏅 tap on Front Display.

Note:

As long as the playback on an external monitor is

switched on, you cannot use the Rear Seat Entertain-

ment.

Steering wheel-mounted controls

(SWC)

Up to 8 functions of the device can be operated via

existing steering wheel-mounted controls. This requires

assigning the desired functions to the buttons of the

steering wheel-mounted controls.

Note:

The SWC function operates with analogue control

signals (passive resistive matrix). Depending on the

vehicle type, you may require an additional interface.

쏅 In the main menu (if necessary under Apps), select

the SWC app.

In the  rst step, assign the desired functions to up to 8

placeholders:

쏅 Select one of the placeholders 1 - 8.

쏅 Select a function for this placeholder.

An assigned placeholder is identi ed by a check

mark. A selected function is identi ed by the number

of the placeholder.

쏅 Repeat these steps for every additional function to

be assigned to the steering wheel-mounted controls.

In the next step, assign the assigned placeholders to the

buttons of the steering wheel-mounted controls:

쏅 Tap on [

Placeholder 1 and the assigned function are

displayed.

쏅 Press a button of the remote control for approx. 1

second.

The displayed function is assigned to the button

being pressed.

쏅 Tap on [

] to assign the next function.

Note:

Tap on [

] to return to a previous function and, if

necessary to reassign it.

Rear Seat Entertainment | Showing device display on external monitor | Steering wheel-mounted controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt SERIES 945 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt SERIES 945

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info