Bedienungsanleitung Blaupunkt SSP701 (Seite 7 von 92) (Deutsch, Englisch, Polnisch)

698445

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

1. Control Panel

1a. DRY TANK - Information about the empty

water tank (see FILLING THE WATER

TANK)

1b. The “greater-steam-flow” icon

1c. The “ECO steam flow” icon

1d. Control lamp - information about

thermostat operation. When the light

flashes, the steam station heats up.

When it is on continuously, the steam

station is ready for ironing.

1e. Switch

1f. Set – steam-flow-intensity selection

button (intensive / Eco)

1g. Service button (iron cleaning)

1h. Sleep-mode icon

2. Steam-burst button

3. Soleplate

4. Steam hose

5. Iron stand

6. Water tank

7. Water inlet

8. Steam-hose bands

BEFORE FIRST USE

Remove all papers, cartons, and foils protecting the appliance and its parts.

The iron may emit a delicate smoke and smell the first time it is used. It is recommended to warm up

the iron before ironing and use it on an old fabric few times.

FILLING THE WATER TANK

Make sure that the steam station is disconnected from the power supply before filling the tank. Open

the water-inlet cap and fill the tank through the inlet with the beaker.

Do not exceed the maximum level (1.6 l)

IRONING

After filling the water tank, connect the steam station to the power source. Turn off the steam station

by pressing the button (1e). Set the required steam intensity by pressing the steam-intensity button

(SET - 1f ). The chosen setting will be presented by a highlighted symbol within the control panel.

When the steam-readiness lamp (1d) stops blinking and lights permanently, the ironing can start.

Press the steam-release button to release the steam from the iron.

The no-water indicator light will come on after 30 seconds, when there is no water in the tank. Water

must be poured into the tank through the water inlet.

When the ironing is finished, turn off the steam station by pressing the power button for 3 seconds

(1e).

SWITCHING OFF THE STEAM STATION

To switch off the steam station, press and hold the power button for 3 seconds. Any icons and indicator

lamps will go out. Then disconnect the steam station from the power source.

THE ADDITIONAL STEAM-EMISSION FUNCTION

If increased steam emission is required, press the steam-release button twice. The iron will release the

increased amount of steam and then return to a constant level of steam generation.

THE AUTOMATIC SHUT-OFF FUNCTION

The iron automatically switches off when it remains still for 10 minutes. The indicator light and the

sleep-mode icon will flash, and the steam station will emit a sound signal.

Press the steam button to continue ironing. Wait for the indicator light to begin glowing continuously

before ironing.

CLEANING AND MAINTENANCE

Never immerse the iron or the steam station in water. Make sure that the iron and the station have

SSP701

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt SSP701 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info