Bedienungsanleitung Blaupunkt Stockholm 400 DAB (Seite 27 von 236) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

790565

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

8. Digital radio: DAB/ DAB+

Digital Audio Broadcasting (DAB for short) is the digital

successor to analogue FM broadcasting. Digital transmission

has some differences from the familiar analogue FM radio:

Several stations are broadcast on one channel – the so-called

ENSEMBLES (= programme packages).

The stations in an ENSEMBLE are called SERVICES (= stations

and/or data services).

In Germany, for example, the ENSEMBLES are available

regionally from public broadcasters; moreover, there are

currently two ENSEMBLES that can be received throughout

Germany: DR DEUTSCHLAND and ANTENNE DE.

The stations do not output disagreeable noises known from

FM; a station is either heard with a consistent quality or not

heard at all when error correction is no longer able to

reconstruct the signal, accompanied by short, so-called

"bubbling" noises.

Starting to play the DAB/DAB+ radio

Use the SRC button to select one of the memory levels DAB1

dAB2 or DAB3.

Note: Some memory levels are inactive depending on the

setting; for example, only the DAB1 memory level is active.

See "SETTINGS".

Note: There are 5 memory slots available for each memory

level.

Searching/scrolling through stations

By turning the right button/knob, you can scroll up (clockwise)

or down (counter clockwise) through the stations in the

current Ensemble.

When turning, a new station is displayed; when you stop

turning, the displayed station is recalled and played.

After passing the first or last station of the current Ensemble,

the display will show <<< or >>>. You can now turn the knob

in the opposite direction to stay in the current Ensemble or

wait a moment while the unit automatically searches for and

plays the previous (<<<) or next (>>>) Ensemble.

Note: This function is the default setting for the right

button/knob in the DAB mode, but it can be changed, see

"SETTINGS".

If the basic setting has been changed, first select the function

by pressing the right button/knob; the SERVICE indication will

appear.

Ensemble Search

Press the right button/knob once, the display briefly shows

ENSEMBLE.

Then, turn the right button/knob in the desired direction to

find Ensembles on the lower or higher channels. The display

shows the current channel as you search until you find a new

Ensemble.

This search works the same way as the search that starts when

scrolling through stations when <<</ >>> is displayed – see

the previous section.

Searching the Preset List (Browse mode)

Press the right button/knob repeatedly until BROWSE appears

in the display.

Then, turn the right button/knob to scroll through the list of

stations stored in the unit.

Once the desired station is found, select it by pressing the

right button/knob.

Note: You can use the menu (see "SETTINGS") to start DAB

SERVICE SCAN, which updates the station list and removes

inactive stations from it.

Note: You can set the browse mode as the default setting

for the right button/knob in the DAB mode – see "SETTINGS".

PTY Search

If the PTY (programme type) function is enabled (see

"SETTINGS"), the PTY function can also be selected by pressing

the right button/knob.

Turn the right button/knob to start searching for the preset

PTY code (see "SETTINGS" for the pre-selection of PTY type).

Storing/selecting saved stations

You can save your favourite stations in the station memory

using the 1-5 buttons. Each memory level can store up to 5

stations.

Set the desired station as described above.

Then, press the desired memory button for about one second

until a beep confirms that the station has been stored; release

the button after the beep.

You can recall a saved station by briefly pressing the memory

button.

Playing saved stations (P-SCAN)

You can play back all stations at the selected memory level:

To do this, press the MENU button for more than one second.

The display will show P-SCAN and the current SERVICE.

The P-SCAN function continues until terminated by pressing

the right button/knob.

Playing the available stations (SCAN)

You can play all stations in the selected frequency band:

To do this, press the right button/knob for more than one

second.

The device first updates the service list with a scan, and then

displays SCAN and the current SERVICE.

The scanning (SCAN) continues until stopped by pressing the

right button/knob.

Changing the display

* PTY (programme type)

* Name of Ensemble (software package)

* Memory/memory level + channel

* Radio text

* Memory/memory level + time

Note: The display function availability depends on the

station.

Further features or options:

See "SETTINGS".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Stockholm 400 DAB Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info