Bedienungsanleitung Blaupunkt Stockholm 400 DAB (Seite 32 von 236) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

790565

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

15. Clock

The unit has an internal clock so you can view the time on the

display by pressing the DIS button until the desired

information appears.

The time can also be displayed when the unit is turned off, see

"SETTINGS".

To display the time when the unit is off the vehicle's ignition

must be on; if the ignition is off, the display turns off

completely to reduce power consumption.

To set the clock see "SETTINGS".

16. Steering wheel remote control (SWC)

You can assign the steering wheel remote control buttons (if

available) to the existing functions in the unit's SWC

configuration.

Storing functions

Open VARIOUS -> SWC in the device settings.

Then, with the right button/knob select the function you wish

to programme and confirm with the right button/knob.

The unit will now wait for a signal from the steering wheel

remote control and display PRESS KEY AT STEERING WHEEL

CONTROL FOR 1SEC. Press the desired button on the steering

wheel remote control.

If the button has been successfully programmed, the display

will show OK. Repeat the procedure if the unit displays FAIL or

does not respond at all.

Repeat this step for all buttons to be programmed.

Note: If storing is not possible even after several attempts

or is not performed correctly, check the device connections or

the compatibility of the interface used. If FAIL is always

displayed, the error is probably in the remote control or in the

interface. If the unit does not respond at all, make sure that the

remote control/interface is (properly) connected.

Note: The programmable SWC interface of this device

includes analogue steering wheel presets. The device works

with analogue remote controls that control functions through

different resistance values (resistance matrix) at the connector

(up to two control lines and 1x GND).

Some remote controls are directly compatible, others require a

SWC interface. The steering wheel remote controls cannot be

connected without an interface via CAN.

For more information on the accessories suitable for your

vehicle, contact your specialist dealer or the vehicle

manufacturer.

17. Settings | Menu

Select the settings by pressing the MENU button. Turn the

right button/knob to navigate through the settings or change

a setting.

To select an option or change a setting select it by briefly

pressing the right button/knob.

Press and hold the right button/knob or select <<< to move

up one level again; select <<< at the highest level to exit the

settings menu. You can also exit the settings menu by pressing

the MENU button again.

The following settings can be entered or customised (the

settings are arranged by different categories):

TUNER (RADIO):

In this submenu you can make settings for the radio receiver.

TRAF:

Enable/disable traffic message prioritisation.

When this function is activated, the unit will switch

to the radio station last heard and then back to the

previously active source after receiving a traffic

announcement. When the function is active, a small

symbol with three vehicles appears on the display.

TRAFFIC (VERKEHR) appears on the display during

a traffic message.

Note: This feature must be supported by the

radio station.

Note: To adjust the volume, refer to the

VOLUME (LAUTSTAERKE) menu option.

Note: If the reception of a radio station is

interrupted, the unit automatically seeks a new

station with traffic information. Enabling this

feature also limits your search to the stations that

support this feature.

Note: The current traffic announcement can be

interrupted by pressing the SRC button.

REG:

When this function is on, only stations with the

same regional programme are selected if automatic

station switching is required due to poor reception.

Note: The RDS AF function must be set to ON

(EIN), the function must be supported by the radio

station.

PTY:

When this function is enabled, the PTY function is

also available by pressing the right button/knob to

search for a specific type of station/music genre.

PTY TYPES (PTY LISTE):

Active only when PTY is ON (EIN).

Selects the station type/music genre for the PTY

function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Stockholm 400 DAB Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info