Bedienungsanleitung Blaupunkt STSK 757301 (Seite 13 von 16) (Deutsch, Englisch)

716230

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Product Specications

Voltage 230-240V

Power 800W

Variable Speed 800 – 3000 SPM

Bevel Angle 0 - 45°

Orbital Positions 3

Stroke Length 20mm

Maximum Material Thickness 80mm Wood, 8mm Steel

Dust Extraction Yes

Weight 2.7Kg

Materials You Can Cut

This jigsaw is a versatile tool that allows you to cut many diﬀerent types of materials. Some of these materials include:

• Wood products such as lumber, hardwood, plywood, composite board, and panelling

• Drywall

• Fibre board and plastic

• Metals such as pipe, steel rods, sheet steel, aluminium, brass and copper.

NOTE: There are many diﬀerent types of blades available. Generally, there are metal cutting blades (ﬁne teeth) and wood cutting

blades (coarse teeth). Use the correct blade for your application. The packaging on the blade will indicate the type of materials each

blade is designed to cut.

General Cutting

Clearly mark the workpiece to locate the position of the cut.

Hold smaller workpieces with a vice. Clamp larger workpieces to a workbench or table.

WARNING Any workpiece that is not adequately clamped in place may come loose and cause serious injury. Never hold the

workpiece with your hand.

WARNING Keep hands and ﬁngers away from between the motor housing and blade holder. Do not reach underneath workpiece

while jigsaw is running.

• Rest the front of the jigsaw base on the workpiece and align cutting edge of the blade with the cutting line on your

• workpiece Make sure the power cord is out of your way and not in the path the blade will follow.

• While ﬁrmly gripping the jigsaw, and with the blade NOT in contact with the surface to be cut, start the jigsaw by pressing the

lock-oﬀ button and squeezing the trigger switch.

• Once the jigsaw has reached the desired speed, gradually bring the moving blade into contact with the workpiece at the

appropriate location.

NOTE: Do not force the jigsaw. Use only enough force to keep the blade cutting. Excessive pressure on the blade will cause it to

bend and twist, which may result in breaking the blade.

Metal Cutting

Many types of metal can be cut with your jigsaw. When cutting any kind of material, be careful not to twist or bend the blades. Do

not force the blade. If the blade vibrates excessively, use a ﬁner toothed blade. If the blade heats excessively, reduce the speed of

cutting.

Clamp all work ﬁrmly and jigsaw as close as possible to the clamping point to eliminate any vibration of the work being cut.

When cutting conduit, pipe or angle iron, clamp work in a vice if possible and saw close to the vice. To cut thin sheet materials place

the material between hardboard or plywood and clamp the layers to eliminate material vibration and tearing. By doing this, the

material will be cut smoothly. Lay out your pattern or cutting lines on top of the ‘sandwich’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt STSK 757301 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info