Bedienungsanleitung Blaupunkt thb 210a (Seite 22 von 24) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

394477

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

THb 210A

- When you drill holes, ensure that you do not damage

any vehicle components.

- If the positive and negative cable are extended, ensure

that the cross section is not less than 2.5 mm

- An incorrect installation can result in malfunctions of the

electronic vehicle systems or your car sound system.

Installation and connection instructions

With respect to accident safety, the THb 210A must be

secured in a professional way.

When selecting the installation location, select a dry

location that offers sufﬁ cient air circulation for cooling

the ampliﬁ er.

The THb 210A must not be installed on rear shelves, rear

seats or other locations that are open to the front.

The installation location must be suitable to accept the

accompanying screws and provide a ﬁ rm support (see

page 2 / Fig. 1).

The ampliﬁ er power cable must be ﬁ tted with a fuse no

more than 30 cm from the battery to protect the vehicle

battery in case of a short circuit between power ampliﬁ er

and battery. The fuse of the ampliﬁ er protects only the

ampliﬁ er, not the vehicle battery.

Switching on/off

One of the special features of the THb 210A is its automatic

switch-on.

The subwoofer box automatically switches on if a music

signal is received.

If there is no music signal for more than 60 seconds, the

THb 210A automatically switches off.

Connection (see p. 2 /Fig. 2)

Connection 6 is connected to the positive pole of the

battery and connection 7 to negative vehicle ground.

The control of the THb 210A should ideally be a two-

channel control, either via the preampliﬁ er outputs or the

loudspeaker outputs of the car sound system. A control

solely via the right or left channel is also possible since the

low-frequency portion of the music is generally identical

on both channels.

The preampliﬁ er outputs are connected to the cinch (RCA)

sockets of the woofer box via a shielded sound cable.

To connect the device, we explicitly recommend the use of

the original Blaupunkt RCA cable 7 607 885 093 (1.3 m) or

7 607 886 093 (5 m).

With control via the loudspeaker outputs, the input con-

nections of pos. 9/: are fed to the closest loudspeaker

cables (front or rear) on the left and right. They are sepa-

rated and connected to the input connections. The polarity

of the + or - connections must be observed. Bridge output

stages (BTL) can also be connected directly without an

additional adapter.

TIM function:

For car sound systems with activated TIM function, the

THb 210A must be controlled via the loudspeaker outputs of

the car sound system and not via the RCA inputs (see page 2

/ Fig. 2 of the car sound system operating instructions).

1 Input sensitivity

2 Phase position

3 Upper cut-off frequency

4 Connector cable

5 Preampliﬁ er inputs

6 + Battery

7 - Ground

Left loudspeaker input

9 Right loudspeaker input

: 20 A fuse

; Status display (PRT/PWR)

Settings

The following control setting is recommended as basic

setting before putting the device into operation: Sensitivity

(gain) pos. 1 to minimum, phase pos. 2 to 0°, ﬁ lter (cross-

over) pos. 3 to approx. 80 Hz. Switch on the device and

select a musical piece with distinctive bass playback.

Increase the volume of your stereo system to the desired

volume level. Now slowly increase the gain control 1

until you can hear a clear ampliﬁ cation of the bass level.

Next, use the crossover control 3 to select a ﬁ lter setting

that provides a well-contoured bass. You may have to

alternately optimise the gain control setting 1 and the

ﬁ lter setting 3.

A droning bass with excessive volume requires a ﬁ lter

setting with a low frequency.

The phase switch must be set so that the bass is integrated

into the acoustic pattern as best as possible and not re-

cognisable as an individual source.

Also check your settings of the THb 210A with the bass

control fully open and, if necessary, with activated loud-

ness. An overloading of the subwoofer box by selecting

an excessive ampliﬁ cation (pos. 1) results in a distorted

playback and can damage the loudspeaker.

Recycling and disposal

Please use the return and collection systems

available to dispose of the product.

Subject to changes

THB_210A_10_06.indd 22THB_210A_10_06.indd 22 05.10.2006 9:36:23 Uhr05.10.2006 9:36:23 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt thb 210a Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info