Bedienungsanleitung Blaupunkt TravelPilot Lucca 3.3 (Seite 34 von 46) (Englisch)

64316

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

You can select the tolerance either as a

percentage value or kilometres per hour.

Press on Fixed Value/Percentage to

switch between the two settings.

Map options

You can use the Map Settings menu

to adjust the Lucca’s colour

settings.

You can also use this menu to select to

show/hide POIs and international and

national street names on the map.

Please read the chapter “Using map view

during route guidance”, section “Activate

additional map information”.

Audio settings

You can use the Sound Settings menu to

select the volume, navigation voice output

and button sounds for the Lucca. You can

also use this menu to set the voice output

and button sounds to mute and activate the

dynamic volume function.

This dynamic volume function adapts the

Lucca’s volume to the vehicle’s speed,

enabling you to understand the voice output

despite any loud driving noises.

Press the Navigation button.

The Navigation menu opens.

Press the Settings button.

The Settings menu opens.

Press the Sound Settings button.

The Sound Settings menu opens.

Use the controller to adjust the volume

from between mute (left) to max. volume

(right):

Volume: Device volume

(for all applications such as, e.g. the

Music Player)

Voice: Voice output volume

Keys: Button / key sound volume

You can also set the voice output and

button sounds to mute:

➜

–

Press the Voice button to activate (tick)

or deactivate (no tick) the Voice mute

function.

Press the Keys button to activate (tick)

or deactivate (no tick) the Key/Button

mute function.

You can press the button below the

controllers to switch between the

following settings:

Single Tone: an acoustic signal issued

before voice output

Disabled: no acoustic signal before

voice output

Double Tone: a double acoustic signal

issued before voice output

Press the Dynamic Volume button to

activate (tick) or deactivate (no tick)

automatic adjustment of the volume to

the vehicle’s speed.

If you activate this function, you will be

shown the Dynamic Volume menu:

Slide the Minimum speed controller

in the relevant direction to specify the

speed at which the volume is to be

increased.

Slide the Maximum speed controller

in the relevant direction to specify the

speed at which the volume is to be set

to maximum.

Route parameters

You can use the Route Parameters

menu to specify the following route

planning parameters:

Route options: Route speed proﬁ le

(fast/short/economy)

Vehicle proﬁ le (vehicle/bicycle/

pedestrian)

Types of roads and permitting/not

permitting U-turns

These route parameters will be saved and

used for all future route guidance.

Please read the chapter “Selecting route

parameters”.

➜

–

➜

•

Basic settings

Lucca33_EE_long_GB.indd 34Lucca33_EE_long_GB.indd 34 12.07.2007 13:16:14 Uhr12.07.2007 13:16:14 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt TravelPilot Lucca 3.3 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info