Bedienungsanleitung Blaupunkt Wolfsburg 945 (Seite 22 von 27) (Englisch)

614343

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Basic settings

In the settings menu, you can adjust the basic settings

for the di erent functions of the device to your require-

ments.

쏅 Press the SETUP button

- or -

쏅 In the main menu, press the Settings button.

The settings menu is displayed, the General sub-

menu is activated.

쏅 Call up the submenus with the buttons in the lower

area of the settings menu.

Video

The following settings are possible:

Aspect ratio – Adjust image format

Video Input – Adjust the colour system of the external

video input

Rear view camera – Adjust back-up camera (if a back-up

camera is connected)

AV-IN 2 mode – If you connect a back-up camera with

audio signal to the AV-IN 2 input of the device, you can

play the camera tone via the loudspeakers of the car

sound system. To do so, enable "Camera".

Parking – When "Parking" is activated, the display of the

device switches to parking mode when parking.

Backcar mode – Select the parking aid (parking radar or

back-up camera) to be shown on the display.

Parking volume – Adjust the volume of the active audio

source while parking.

DivX registration code – Display of the DivX® registra-

tion code

General

The following settings are possible:

Radio region – Select the reception region for the radio

reception.

Background light o – If this value is set, the display of

the radio is completely switched o after 10 or 20 sec.

without use.

Dimmer mode – Switching the display brightness be-

tween daytime and nighttime mode.

Dimmer – Setting the display brightness for the day or

the night.

VarioColour – Adjust the illumination colour of the but-

tons.

Beep – Switch con rmation beep on/o

IR remote control – Here you can select whether the re-

mote control should be used to control the source on the

display of the device (front zone) or the source on the

external monitor (rear zone).

Wallpaper – Select the wallpaper for menus. Various mo-

tifs can be selected in the device. You can also select your

own images which you previously stored on the microSD

card.

Calibration – The touchscreen can be calibrated here.

SWC – The buttons of a connected steering wheel con-

trol can be con gured here.

Theft protection – Activate/deactivate the code query.

If the code query is activated, the four-digit code num-

ber must be re-entered every time the device is discon-

nected from the vehicle system voltage (e.g. removal of

the battery for repairs).

Security code – You can change the code number. To

change the code number, enter the four-digit code num-

ber. The code number is set to 0000 at the factory.

Load factory – Resets all personalised settings. With the

exception of the personally selected security code.

Software version – Display of the current software ver-

sion.

Basic settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Wolfsburg 945 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Wolfsburg 945

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info