626843
39
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
37
6After the export is complete, remove the USB flash drive�
7Insert the USB flash drive into a computer, and log in to the Blend Wizard
(my�blendtec�com)� Follow the instructions on the site to transfer the profile to
your account�
4.3.4 Blender Statistics
Blend Cycle Counts
You can review the total number of cycles run and the number of cycles run for
each button
1�Press and hold buttons 2 and 4 for 1 second to enter the menu�
2�Use button 1 to scroll through the menu and then button 5 to select Cycle
Counts�
3�Use button 1 to scroll and see the number of cycles run in each category�
4�Press pulse button to cancel and return to the previous menu
Note: The counts for pulse cycles increment on a different basis. Time accumu-
lates each time the pulse button is pressed. The count will increment after the
first 0.5 seconds of pulse time, and every 20 seconds of pulse time thereafter.
Diagnostic Error Log
You can review the diagnostic errors that have been logged on the blender�
1�Press and hold buttons 2 and 4 for 1 second to enter the menu�
2�Use button 1 to scroll through the menu and then button 5 to select Diagnostic
Counts�
3�Use button 1 to scroll and see the number of errors in each category�
4�Press pulse button to cancel and return to the previous menu
Exporting Blender Statistics
Exporting blender statistics (cycle counts, errors, settings and firmware versions)
is a way to save diagnostic information, which Blendtec’s customer service and
repair experts will use if problems arise with your blender�
To export blender statistics to a USB drive, complete the following steps:
1�Locate the USB port on the bottom of the blender�
2�Plug the USB flash drive into the blender’s USB port
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen� If the blender is in
ENGLISH
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blendtec CHEF 600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blendtec CHEF 600

Blendtec CHEF 600 Bedienungsanleitung - Englisch - 19 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info