Bedienungsanleitung Blendtec CHEF 775 (Seite 9 von 19) (Englisch)

626841

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

1514

Blend Cycle Pause

When in automatic mode, this setting allows you to pause and resume a blend

cycle at the same time and speed�

To enable or disable the Blend Cycle Pause feature, complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Settings from the menu by touching the

select button�

3� Use the scroll button and then select Blend Cycle Pause from the menu by

touching the select button�

4� Use the select button to toggle between disabling and enabling the blend cycle

pause�

Note: When the Blend Cycle Pause setting is enabled, a cycle can be

paused by pressing any button. If the Blend Cycle Pause function is

disabled, pressing any button disabled will simply stop a blend cycle.

5� Press the cancel/exit button to return to the previous menu�

Slider Lockout (Stealth 875 only)

The Slider Lockout feature allows you to disable the slider bar on the control

surface� When this feature is enabled, only proﬁles on the blender can be used

to operate the blender�

To enable or disable this feature, complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Settings from the menu by touching the

select button�

3� Use the scroll button and then select Slider Lockout from the menu by touching

the select button�

4� Use the select button to toggle between disabling and enabling the slider lockout�

5� Press the cancel/exit button to return to the previous menu�

Language

The menus on the Stealth’s display are available in three languages:

English, French, and Spanish�

To select a language, complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Settings from the menu by touching the

select button�

3� Use the scroll button and then select Language from the menu by touching the

select button�

4� Use the scroll button to ﬁnd your desired language, then press select�

5� Press the cancel/exit button to return to the previous menu�

4.1.11 Blender Statistics

Blend Cycle Counts

You can review the total number of cycles run, the number of cycles run for

each control surface number, the number of times the pulse button has been

used and the number of times the slider control bar has been used (For

Stealth 875 only)�

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Cycle Counts from the menu by touching

the select button�

3� Use the scroll button to see the number of cycles run in each category�

4� Press the cancel/exit button to return to the previous menu�

Note: The pulse count refers to pulse sets. For example, touching the pulse

button 5 times in a row will register as 1 pulse count. Touching the pulse

button, then a cycle number and then the pulse button will register as 2

pulse counts.

Diagnostic Error Log

You can review the diagnostic errors that have been logged on the blender�

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Diagnostic Counts from the menu by

touching the select button�

3� Use the scroll button to see the how many errors have occurred in each category�

4� Press the cancel/exit button to return to the previous menu�

Exporting Blender Statistics

Exporting blender statistics (cycle counts, errors, settings and ﬁrmware versions)

is a way to save diagnostic information, which Blendtec’s customer service and

repair experts will use if problems arise with your blender�

To export blender statistics to a USB drive, complete the following steps:

1� Use a Phillips screwdriver to remove the USB cover at the top of the right side of

the blender�

2� Plug the USB ﬂash drive into the blender’s USB port�

Note: If the blender is in manual or automatic operation mode, the USB

ﬂash drive menu will automatically load on the screen. If the blender is in

programming mode, go to the main menu and select USB Flash Drive.

3� Use the scroll button to ﬁnd Export Counts, then press the select button� You will

be asked if you want to export counts to the sth-cnts�csv ﬁle�

4� Press the select button again to start the export process�

5� After the export process is ﬁnished, remove the USB drive from the blender and

secure the cover on the USB port with a Phillips screwdriver�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec CHEF 775 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec CHEF 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info