Bedienungsanleitung Blendtec CONNOISSEUR 825 (Seite 16 von 19) (Englisch)

626840

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

2928

CONNOISSEUR 825™

Overtemp Error — This indicates that the motor is overheating� The blender

has been disabled until the unit cools to operating temperatures� If the

blender does not work after 20 minutes or more of cooling time, please

call your Blendtec Service Agent�

Overload Error — This indicates an overload on the motor�

1� Clear the error message by pressing any button or turning the blender off and

on again�

2� Remove the jar, and run the blender to determine whether the issue relates to

the jar or the motor�

3� With the jar removed, check for blockage in or around the socket on the motor

base and the blade assembly on the jar�

4� Place the jar securely on the motor base, and touch to pulse the blade through

the mixture�

5� Ensure the jar is not loaded with excessively hard or thick ingredients�

If overload condition re-occurs, contact your Blendtec service agent�

A “Watchdog Timeout” error indicates a disruption in the normal operation of

the electronic blender controls� This is an uncommon error message, which is

usually caused by incoming power ﬂuctuations or spikes� This error message is

cleared by turning off the blender for 10 seconds (using the switch), then turning

back on� If this error is displayed immediately on start-up, or if it occurs regularly

during normal use contact your Blendtec service center for assistance�

CHEF 775™

Overtemp Error — This indicates that the motor is overheating� The blender has been

disabled until the unit cools to operating temperatures� If the icon does not disappear

after 20 minutes or more of cooling time, please call your Blendtec Service Agent�

Touch Error — This indicates that more than one touch sensor on the blender has

been touched� To avoid this message, touch the center of the desired button�

If this icon remains on when no one is touching the touch area, unplug and re-plug

in the blender� If the problem persists please contact your Blendtec Service Agent�

Overload Error — This indicates an overload on the motor�

1� Clear the error message by pressing any button or turning the blender off and

on again�

2� Remove the jar, and run the blender to determine whether the issue relates to

the jar or the motor�

3� With the jar removed, check for blockage in or around the socket on the motor

base and the blade assembly on the jar�

4� Place the jar securely on the motor base, and touch to pulse the blade through

the mixture�

5� Ensure the jar is not loaded with excessively hard or thick ingredients�

If overload condition re-occurs, contact your Blendtec service agent�

Reset Errors — If this message appears on the LED information center it indicates

there has been an error� There are error messages from E-01 through E-06� If any of

these errors appear, press the cancel/exit button to clear the message� If the error

message reappears please contact your Blendtec Service Agent�

EZ 600™/Chef 600™

Overtemp Error — This indicates that the motor is overheating� The blender

has been disabled until the unit cools to operating temperatures� If the

blender does not work after 20 minutes or more of cooling time, please

call your Blendtec Service Agent�

Overload Error — This indicates an overload on the motor�

1� Clear the error message by pressing any button or turning the blender off and

on again�

2� Remove the jar, and run the blender to determine whether the issue relates to

the jar or the motor�

3� With the jar removed, check for blockage in or around the socket on the motor

base and the blade assembly on the jar�

4� Place the jar securely on the motor base, and touch to pulse the blade

through the mixture�

5� Ensure the jar is not loaded with excessively hard or thick ingredients�

If overload condition re-occurs, contact your Blendtec service agent�

6.3 NOISE LEVEL CHANGES

If the blender noise level has increased from original levels, determine whether

the sound is coming from the blender motor or jar�

1� Blender Motor: Remove the jar from the motor base and run the motor� If it is

excessively noisy, contact your Blendtec service center for evaluation�

2� Jar: After checking the motor, place the jar back on the motor with about 16 oz

(475 ml) of water� Run the motor for a few seconds using the pulse button� (If

you have more than one jar, test a different jar to determine whether the sound

is different�) If a jar is excessively noisy or if the blade assembly seems loose or

sounds “gravelly” when turned by hand, contact your Blendtec service center�

6.4 NOT BLENDING OR UNSATISFACTORY BLENDED TEXTURE

If the your blender has stopped blending or if the blended texture of product is

lumpy or uneven, do the following:

1� Ensure the mixture is not cavitating during the cycle� Cavitation is a condition in

which an air pocket forms within the drink mix because the mix is too cold or

too solid� The blender blade then spins freely in this cavity� This problem can be

corrected by increasing the mix temperature by either reducing ice, increasing

liquid and/or ensuring that the frozen ingredients used in the recipe are never

colder than 10 °F (-12 °C)�

2� If the recipe is mixing well but has not had enough time for complete blending,

increase cycle time� Try a longer cycle or touch and hold the Pulse button for

the required extra blending time�

3� Make sure the jar is fully seated on the blender base�

4� Check if the blade is ﬁrmly afﬁxed to the drive shaft� Hold the drive shaft in one

hand and try to spin the blade with the other hand� If the blade turns without

turning the drive shaft, contact your Blendtec customer service agent�

5� TRIED EVERYTHING? If none of the preceding suggestions work, contact your

Blendtec service agent for further assistance�

Blendtec CONNOISSEUR 825 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec CONNOISSEUR 825

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info