Bedienungsanleitung Blendtec CONNOISSEUR 825 (Seite 14 von 156) (Englisch, Französisch, Spanisch)

626840

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

2� Plug the USB ﬂash drive into the blender’s USB port�

Note: If the blender is in manual or automatic operation mode, the USB

ﬂash drive menu will automatically load on the screen. If the blender is in

programming mode, go to the main menu and select USB Flash Drive.

3� Select Import Proﬁle from the USB ﬂash drive menu�

4� Scroll through the items on the ﬂash drive and locate the desired custom proﬁle

ﬁle (by default named stealth�bpf)�

Note: Items with a + sign next to them are folders; if the custom proﬁle ﬁle

is in a folder, press the select button to open the folder.

5� Select the desired ﬁle� You will then be asked whether you want to import the

selected ﬁle�

6� Press the select button again to start the import process� After the ﬁle has been

imported, the proﬁle in the ﬁle will be automatically loaded as the active proﬁle

on the blender�

7� Remove the USB drive from the blender, and secure the cover on the USB port

with a Phillips screwdriver�

Secure Blender Feature

When creating or modifying a proﬁle via the Blend Wizard, one of the options is

to secure the blender� If you select this option, once you have downloaded the

proﬁle to a USB drive and then imported the proﬁle to the blender, some of the

advanced programming functions will be disabled�

The secured proﬁle will be the active proﬁle on the blender, another proﬁle

cannot be made the active proﬁle and a new proﬁle cannot be imported to

the blender (unless it was created via your Blend Wizard account)� Additionally,

the blend cycles in the proﬁle cannot be changed on the blender, and the

Enclosure Safety Mode, Screen Standby Time, Blend Cycle Pause and Slider

Lockout settings cannot be modiﬁed�

To unlock these features, complete the following steps:

1� Log on to your Blend Wizard account at my�blendtec�com�

2� Edit the secured proﬁle, selecting the option to turn off the secure blender

mode, or create a new proﬁle with the secure blender mode turned off�

3� Import the proﬁle to a USB drive, and then follow the instructions to import the

ﬁle to the blender�

Exporting and Transferring Proﬁles

To export proﬁles and transfer them to the Blend Wizard, complete the

following steps:

1� Ensure the proﬁle you want to export is the active proﬁle on the blender�

2� Use a Phillips screwdriver to remove the USB cover at the top of the right side of

the blender�

3� Plug the USB ﬂash drive into the blender’s USB port�

Note: If the blender is in manual or automatic operation mode, the USB

ﬂash drive menu will automatically load on the screen. If the blender is in

programming mode, go to the main menu and select USB Flash Drive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec CONNOISSEUR 825 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec CONNOISSEUR 825

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info