773992
14
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
14
7.2 NOISE LEVEL CHANGES
If the blender noise level has increased significantly from original levels, determine
whether the sound is coming from the blender motor or jar�
Blender Motor: Check to see if the excess noise is coming from the blender motor
base� Remove the jar and press button number two or three� Listen to the motor sound
without a jar attached� If it is excessively noisy contact your Blendtec service center�
Jar: Check to see if the excess noise is coming from the jar� Place the jar back on the
motor� Run the motor for a few seconds using the “PULSE” button� If you have more
than one jar, test a different jar to determine whether the sound changes as different
jars are used� If a jar is excessively noisy, or if the blade assembly seems loose or
sounds “gravelly” when turned by hand, contact your Blendtec service center�
7.3 BLENDED TEXTURE UNSATISFACTORY
If the blended texture of product is lumpy or uneven, do the following:
Ensure the mixture is not cavitating during the cycle: Cavitation is a condition
in which the blender blade spins freely in an air pocket within the drink mixture
because the mixture is too cold or too solid� This problem can be corrected by
increasing the mix temperature by reducing ice, increasing liquid and/or ensuring that
the frozen ingredients used in the recipe are never colder than 10 degrees Fahrenheit
(-12 degrees Celsius)�
Increase cycle time: If the ingredients are mixing well but have not had enough
time for complete blending, try a longer cycle or touch and hold the “Pulse” button for
required extra blending time�
TRIED EVERYTHING? If none of the preceding suggestions work, contact an authorized
Blendtec service agent for further assistance�
SECTION 8 - WARRANTY (International)
Your Blendtec blender motor is warranted for 3 years parts and 1 year labor� The jar
assembly, including all moving jar parts, is covered against leaking or breakage for 3
years� Warranties begin from date of purchase�
Cosmetic damage, product abuse, unreasonable use, damage resulting from an
accident, product tampering, servicing performed or attempted by unauthorized service
agencies, units that have modifications, or have been used for commercial purposes
are not included under this warranty�
The quality of Blendtec blenders is unsurpassed� You will enjoy years of wonderful and
reliable service from your Blendtec blender�
THIS WARRANTY APPLIES ONLY TO PRODUCTS SOLD BY BLENDTEC OR ITS
AUTHORIZED DEALERS
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blendtec HP3A Home Blender wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info