Bedienungsanleitung Blendtec STEALTH 875 (Seite 7 von 19) (Englisch)

626838

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

1110

Note: After you have disabled a number button, you will notice that an

asterisk appears after the proﬁle name when you return to operation mode.

The disabled button will also not appear on control panel.

Loading a new proﬁle on your blender will reset the proﬁles and enable all

the cycle buttons again.

Permanently Disable Cycle Buttons

To permanently change the cycle buttons in a proﬁle you can export the revised

proﬁle to a USB drive, and then import the proﬁle on the blender� Or you can

disable any number using the Blend Wizard (my�blendtec�com), and then export

the revised proﬁle to the blender�

4.1.9 The Blend Wizard

In addition to using the proﬁles and cycles preprogrammed on your blender, you

can use the Blend Wizard to create custom proﬁles and cycles� For instructions

on using the Blend Wizard to easily develop custom proﬁles and cycles, visit

my�blendtec�com�

Importing Custom Proﬁles and Cycles

After you’ve created your custom proﬁles and cycles using Blend Wizard and

downloaded them to a USB ﬂash drive, use the follow steps to import the ﬁle to

your blender�

1� Use a Phillips screwdriver to remove the USB cover at the top of the right side of

the blender�

2� Plug the USB ﬂash drive into the blender’s USB port�

Note: If the blender is in manual or automatic operation mode, the USB

ﬂash drive menu will automatically load on the screen. If the blender is in

programming mode, go to the main menu and select USB Flash Drive.

3� Select Import Proﬁle from the USB ﬂash drive menu�

4� Scroll through the items on the ﬂash drive and locate the desired custom proﬁle

ﬁle (by default named stealth�bpf)�

Note: Items with a + sign next to them are folders; if the custom proﬁle ﬁle

is in a folder, press the select button to open the folder.

5� Select the desired ﬁle� You will then be asked whether you want to import the

selected ﬁle�

6� Press the select button again to start the import process� After the ﬁle has been

imported, the proﬁle in the ﬁle will be automatically loaded as the active proﬁle

on the blender�

7� Remove the USB drive from the blender, and secure the cover on the USB port

with a Phillips screwdriver�

4.1.7 Selecting the Desired Proﬁle

1� Press and hold the cancel/exit button for 3 seconds�

2� Select Proﬁles from the menu by touching the select button�

3� Use the scroll and select buttons to select either the Standard Proﬁles or

Custom Proﬁles category�

4� After selecting the Standard or Customer Proﬁle category, you can scroll through

the proﬁles in the category and select the desired proﬁle�

5� “Make this the active proﬁle?” will appear on the screen� Press the select button

to conﬁrm or the cancel/exit button to return to the previous menu�

4.1.8 Changing Programmed Cycle Buttons

Temporarily Change Cycle Buttons

To temporarily change cycle buttons when working in a selected proﬁle,

complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Blend Cycles from the menu by

touching the select button�

3� Use the select button to choose the Standard or Custom Blend cycles�

4� Use the scroll button to ﬁnd your desired cycle, then press select�

5� Enter the number you want to assign to the cycle, then press select�

Note: After you have customized a cycle to a number button, you will notice

that an asterisk appears after the proﬁle name when you return to operation

mode. Loading a new proﬁle on your blender will reset the proﬁles back to

default cycle buttons.

Permanently Change Cycle Buttons

To permanently change the cycle buttons in a proﬁle you can export the revised

proﬁle to a USB drive and then import the proﬁle on the blender� Or you can edit

the proﬁle using the Blend Wizard (my�blendtec�com), and then export the proﬁle

to the blender�

Temporarily Disable Cycle Buttons

To temporarily disable a number or cycle button when working in a selected

proﬁle, complete the following steps:

1� Press and hold the cancel/exit button for 3 seconds�

2� Use the scroll button and then select Blend Cycles from the menu by

touching the select button�

3� Use the select button to choose the Standard Blend Cycles�

4� Use the scroll button to ﬁnd Disable Button, then press select�

5� Enter the number button you want to disable, then press select�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec STEALTH 875 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec STEALTH 875

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info