Bedienungsanleitung Blendtec TotalBlender (Seite 7 von 40) (Deutsch, Englisch, Französisch, Spanisch)

626834

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

12 13

Mode

Switch between manual touch to preprogrammed blend cycles

Incremental Speed

Cycles that blend at Lo, Med-Lo, Med, Med-Hi and Hi speeds

Speed Up

Manually increase the speed of the blend

Speed Down

Manually decrease the speed of the blend

Capacitive Touch Sliders

The capacitive touch slider allows you to ne-tune the speed of the blender. Simply slide your nger to the right to increase the blender’s speed

or the left to decrease speed.

Dips

Dressings, dips, sauces, batters

Ice Cream

Ice cream, frozen yogurt, sorbets

Smoothies

Fruit smoothies, green smoothies

Clean

Automatic cleaning cycle

Hot Soup

Soups, hot chocolate, syrups, fondues

+10

Adds 10 seconds to the cycle

Whole Juice

Juices, green drinks

Timed Cycles

Hot soups, batters

Pulse

Used to quickly stir, chop mince at a high speed

Mixed Drinks

Mixed drinks, milkshakes

Batters

Sauces, dips, dressings, batters

Stop

Used to manually stop blend cycle

Blend cycles are timed cycles designed for specic types of blends. These one-touch cycles speed up, slow down and shut o automatically

for ease of use. Blenders may feature some of the following pre-programmed cycles and settings to accommodate a wide range of recipes

and functions. For complete instructions on how to use your specic blender, please visit www.blendtec.com

QUICKSTART - TOUCHPAD ICONS FAQS AND TROUBLESHOOTING

Louder Than Normal Grinding Noise (Jar or Motorbase)

Remove the jar from the base and run a normal smoothie cycle. This

will allow you to listen to the motor alone and identify any abnormal

sounds. If no abnormal sounds are identied, the jar may be the

issue. Please refer to the section on troubleshooting the jar.

“E-02 Overload” Error

If the blender shows an “E-02” or “Overload” error, let it rest

unplugged for ve minutes and then run it without the jar. If the

motor runs normally without the jar, add one cup of water to the

jar and replace on the blender. Run the smoothie cycle. If problem

persists call Customer Care.

No Power

Check main power switch on the machine. Be sure it is in the on

position. If the problem persists, plug the unit into a dierent outlet.

If there is still no power, contact Customer Care.

“Overtemp” Error

Unplug the blender and let it rest for 5-10 minutes. Run the

blender on the smoothie cycle. If the problem persists, contact

Customer Care.

Smoking or Burning Smell

A smoking or burning smell may occur on occasion. If you have

questions, please contact Customer Care.

Troubleshooting the Jar

After ensuring that the shaft has had time to cool (minimum

three minutes), grip the metal shaft at the bottom of the jar

with your ngers and twist. The shaft should make one smooth,

silent revolution with little resistance. If you experience a

dierent result, please refer to the FAQ section on our website

(www.blendtec.com/faq) or contact Customer Care.

Touch Error

Wipe the touch pad with a dry, non-abrasive cloth and then

try pressing the button again. Make sure rm ngertip contact is

made with the intended selection. If error persists, unplug the unit

and allow it to sit for 20 minutes. If the issue continues, contact

Customer Care.

Blending Problems

If it appears that the blend isn’t moving and the blade is spinning,

a bubble of air may have formed within the blend. This is commonly

called cavitation. If this happens, follow these steps: (1) stop the

blend cycle, (2) remove the jar from the blender base, (3) scrape the

inside walls of the jar with a spoon or add a little warm water to the

blend, (4) remove the spoon, replace the jar, and resume the blend.

The blender works best with a 1:3 liquid to solid ratio. If you are

experiencing frequent cavitation, try blending the liquids with the

most brous or dense items rst (e.g., almond milk and dates) to

make the base or paste. Add the remaining ingredients to nish

the blend.

If these troubleshooting steps do not resolve the issue, please contact

Customer Care. Contact information can be found at

www. blendtec.com/company/contact

PREPROGRAMMED MANUAL OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec TotalBlender Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec TotalBlender

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info