459986
14
Zoom out
Zoom in
Vorherige Seite
1/91
Nächste Seite
Instruction ManualGB
9
REPOSITIONING THE DOORS (Fig. 9)
1- Switch off at the socket outlet and pull out the mains plug.
2- Remove all food, loose items and fittings from the appliance and door shelves.
3- Unscrew the bolts and remove the middle hinge while holding doors. (1)
4- Remove the freezer compartment door from the top hinge by sliding down and 
pulling front. (2)
5- Remove the fresh food compartment door by pulling up. (3)
6- Remove the plastic covers on the front top trim. (4)
7- Unscrew the bolts of the top hinge and remove top hinge. (5)
8-  Reposition plugs on the opposite side. (6)
9- Carefully lay the appliance on its back. (7)
(You may need somebody to help you.)
10-Unscrew and remove the left hand side front feet. (8)
11-Unscrew and remove the bottom hinge. (9)
12-Reposition the plastic covers on top of fresh food door to the opposite 
side
.
(10)
13-Unscrew and remove the middle hinge bushing from freezer door. (11)
14-Screw and fix the new middle hinge bushing which is supplied in IB bag to 
the other side. (12)
15-Reposition the hinge bushing and the tap on the fresh food door. (13)
16-Unscrew and reposition the bottom hinge bushing. (14)
17-
Fit the bottom hinge, if necessary adjust and tighten the bolts (15)
18-Fit the other feet and tighten the screws. (16)
19-Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the 
opposite side. (17)
20-Fit the top hinge and tighten the bolts. (18)
21-Fit the plastic cover on the front top trim. (19)
22-Locate the fresh food door to the bottom hinge and attach to the cabinet. (20)
23-Locate the middle hinge on the fresh food door (21) and put the freezer door 
between the top and middle hinge carefully. (22)
24-Fit the middle hinge. Adjust the doors and tighten the bolts. (23)
25-Carefully stand your appliance (you may need somebody to help you) adjust 
the front feet.
26-Remove the plastic plugs on the doors. Unscrew the door handles. Reposition 
the door handles on the other side. Tighten the screws and fit the plastic 
plugs. (24)
27-Put back all, loose items and fittings.
28-Wait for at least 4 hours to allow the system to settle before switching on.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blomberg DSM 1650 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info