Bedienungsanleitung Blomberg GSS 9260 (Seite 2 von 2) (Englisch)

581446

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

QUICK REFERENCE GUIDE EN

Start/cancel button

You use this button to start the selected program; the light on the

button lights up.

Stop the program with the start/cancel button if you would like to

open the door once the dishwasher’s washing program is running.

LED progress indicator lights

The program sequence throughout the

washing process can be monitored from the

progress indicator lights on the control panel.

Warning!

Following the washing stage, in order to drain

and remove water from inside the machine completely, the machine

will pause for approximately 35 minutes. Do not worry this is not a

fault. Then End progress indicator light will come on.

Warning!

Do not switch the machine off before End light comes on.

How to cancel the washing program

Press start/cancel button for 3 seconds. The indicator light will start

flashing. The machine will drain the water inside the machine for

45 seconds. The programme is cancelled when start/stop indicator

light goes off. Then, you can choose and start a new programme.

Important:!

Depending on the stage of the program you have cancelled, there

may be detergent residue or rinse aid inside the machine and

on the load. Make sure the items in the dishwasher are not used

before washing properly.

How to change the washing programme

To change a running programme, press the start/cancel button: The

programme light turns off.

Select a new programme and start it with the start/cancel button:

The respective programme light lights up.

Important:!

The new program will NOT start right from the beginning. It will start

from the stage last carried out by the previous program selection.

On/off button

You turn your dishwasher on / off with this button. When turning on,

the indicator light for the last used programme will light up.

Salt level indicator light

When this indicator light comes on, you must

refill special salt (If applicable).

In machines which do not possess an electrical

salt indicator, the salt content can be read on

the container for the salt. When the visual fill

indicator is dark, there is enough salt in the

container.

When the colour is light, open the container and add dishwasher

salt.

Rinse aid level indicator light

If this indicator light comes on, you have to refill

rinse aid (If applicable).

You can also tell whether rinse aid must be

refilled by looking at the rinse aid dispenser.

When the visual fill indicator is dark, there is

enough rinse aid in the dispenser.

When the colour is light, open the dispenser and

refill rinse aid.

Program selection button

Use the programme selection button to select the desired

programme. The corresponding programme light lights up.

Improper Loading Of Dishware

17 7963 01 00_AB





























Visual Indicator

Wash

Rinse

Dry

End

Combi Tablet Button

Allows to obtain a better drying performance from the multi-purpose

detergents called as all in one detergents such as 2in1, 3in1, 4in1,

5in1 and etc., depending on the hardness level of the tap water. The

programs in which the Combi Tablet function can be enabled are

indicated in the Program Data and Table of Average Consumption

Values. Combi Tablet symbol lights up when you select the Combi

Tablet function.

Rinse aid level indicator light

Salt level indicator light

LED progress indicator lights

Programme indicator lights

Start/Cancel button

Programme selection button

7Combi Tablet button

10 On/Off button

Time Delay indicator lights

Time Delay button

Time delay

With the delay function of your machine, you may delay the starting

time of the program up to 3-6-9 hours using the Time delay button.

3-6-9 hour lamps will start flashing respectively, each time you

press the delay button. If you press the Start/Cancel button while

the desired delay lamp is flashing, then the delay lamp comes

on constantly and the function is saved to the memory. As of this

moment, the countdown starts. Upon completion of the delay

period, the delay lamp will go off and the selected washing program

will start.

If you press the Delay Button when the 9 hours delay lamp is

flashing, then the delay lamps goes off. If you press the Start/

Cancel button when the Delay Lamps are not lit, then the selected

program will start without any delay.

You may follow the remaining delay period from the delay lamps.

For example: If you select the 9 hours delay option, then the 6

hours lamp will come on when there is 6 hours remaining to the

start of washing program and 3 hours lamp will come on when there

is 3 hours remaining.

Changing the delay period

Press Start/Cancel button. The Delay period lamp will start flashing.

You may choose the new delay time by pressing the delay button

again.

Press Start/Cancel button again to save the setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg GSS 9260 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg GSS 9260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info