MANUAL FOR TOUCH CONTROL
BLOMBERG 90 X 33 CERAMIC GLASS HOB
WARNINGS
Read these instructions for use carefully. This is the only way to use the hob correctly and safely.
Keep the assembly instructions, the instructions for use and the technical data sheet for the
appliance in a safe place.
Check the hob immediately after unpacking it. If any damage has been caused during transport, do
not connect the appliance.
IMPORTANT FOR INSTALLATION
Connections must only be made by authorized and qualified personnel. If there is any damage
due to incorrect connections, any type of guarantee will no longer be valid.
The electrical system must be equipped with an appropriate earth connection system.
FOR COOKING
This appliance has been specifically designed for domestic use. The hob must only be used for
preparing food dishes.
Food residues, particularly oil or boiling oil catch fire. FIRE HAZARD!!! When oil or fat is
heated, it is necessary to remain in the immediate vicinity. If oil catches fire, never use water.
Immediately cover with a plate or lid. Switch off the cooking zone. Leave the pan to cool on the
cooking zone.
Do not touch cooking zones that are overheated. BURN HAZARD!!! Keep out of children’s reach.
The afterheat indicator warns if zones are overheated.
Never place inflammable objects on the hob. FIRE HAZARD!!!
If there is a drawer under the hob, it is advisable not to keep inflammable objects or spray cans in it.
FIRE HAZARD!!!
The power supply cable for electrical appliances must never touch hot cooking zones. Cable
insulation and the hob might get damaged.
The cooking zone and pan bottom must always be dry.
If there are breaks, cracks or splits in the ceramic glass, there is a risk of short-circuiting.
Immediately switch off the appliance. Contact the technical assistance service.
If the cooking zone overheats but the display does not work, switch off the cooking zone. BURN
HAZARD!!! Contact the technical assistance service.
If the hob switches off by itself and it cannot be used, it is necessary to disconnect it immediately
from the electrical system and contact the technical assistance service.
