Bedienungsanleitung Blomberg TAF 7239 (Seite 14 von 68) (Englisch, Dänisch, Französisch)

491453

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

C Press “Start/Pause/Cancel” button for

3 seconds to cancel the programme or

turn the programme selection knob in any

direction to end the programme while the

machine is running. Water tank and filter

cleaning warning lights turn on to warn the

user when the programme is cancelled by

pressing the “Start/Pause/Cancel” button

for 3 seconds. However, the warning

lights do not turn on when the programme

is cancelled by turning the programme

selection knob. Only the drying light turns

on and the machine remains in hold until

a new programme is selected and the

“Start/Pause/Cancel” button is pressed.

Child-proof lock of the machine should not

be active in order to perform these two

operations. If the child-proof lock is active,

deactivate it before performing these

operations.

Adding/removing laundry in standby mode

In order to add or remove laundry after the

programme starts:

1.Press the “Start/Pause/Cancel” button to

switch the dryer to “Pause” mode. Drying

process will stop.

2.Open the door at “Pause” position and close

it again after adding or taking out laundry.

3.Press “Start/Pause/Cancel” button to start

the programme.

CAny laundry added after the drying process

has started may cause the dried clothes in

the machine intermingle with wet clothes

and the result will be wet laundry after the

drying process is over.

CLaundry may be added or taken out

as much as desired during a drying

process, but this process will extend the

programme duration and increase energy

consumption since the drying will be

interrupted continuously. Therefore, it is

recommended to add laundry before the

drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any

programme interruption due to the pressing

of button while the programme is running.

The loading door and all buttons except the

“On/Off” button on the control panel are

deactivated when the child-proof lock is active.

Press the “Start/Pause/Cancel” and “Cancel

audio warning” buttons simultaneously for 3

seconds to activate the child-press lock.

To start a new programme after the

programme is over or to interrupt the

programme, the child-proof lock should be

deactivated. Press the same buttons for 3 sec.

again to deactivate the child-proof lock.

C Child-proof lock is deactivated when the

machine is restarted by pressing the On/Off

button.

C Press the relevant buttons for 3 seconds

to activate the child-proof lock. A long

beep will be heard and the child-proof lock

will be activated. A double beep will be

heard if you press any button or turn the

programme selection knob while the child-

proof lock is active. Press the buttons for 3

seconds to deactivate the child-proof lock.

Single beep will be heard and child-proof

lock will be deactivated.

A A double beep will be heard if you turn

the programme selection knob when the

machine is running and the child-proof

lock is active. If you deactivate the child-

proof lock without returning the program

selection knob to its previous position, the

programme will be terminated since the

position of the programme selection knob

is changed. The drying light turns on and

the machine remains on hold until a new

programme is selected and the “Start/

Pause/Cancel” button is pressed.

Ending the programme through

canceling

To cancel any selected programme:

Press “Start/Pause/Cancel” button for about

3 seconds. The “Filter cleaning”, “Water tank”

and “End/ Anti-creasing” warning lights will

turn on at the end of this period for reminding

purposes.

A As the inside of the dryer will be

excessively hot when you cancel the

programme while the dryer is running,

activate the ventilation programme to cool

it down.

End of programme

The “End/Anti-creasing”, “Filter cleaning” and

“Water tank” warning lights on the programme

follow up indicator will turn on when the

programme comes to an end. The door can be

opened and the machine becomes ready for a

second cycle.

Press “On/Off” button to turn off the dryer.

C Final step of the drying cycle (cooling step)

is performed without heat application in

order to keep the items at a temperature

that would not harm them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TAF 7239 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg TAF 7239

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info