Bedienungsanleitung Blomberg taf 7330 (Seite 29 von 44) (Deutsch, Englisch)

302199

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

6 - EN

Rotate the feet to adjust until the machine

stands level and firmly.

C Never unscrew the adjustable feet

from their housings.

Ventilation hose and

connection (for products

equipped with an outlet vent)

Ventilation hose assures exhausting of the

air from inside the machine.

There are 3 air outlets on the rear, left and

right sides of a vented dryer. The sides are

covered by a replaceable plastic cover.

Stainless sheet metal or aluminum pipes

can be used instead of the hose. The

diameter of the pipe to be used should be

minimum 10 cm.

Maximum hose and pipe lengths are given

in the table below.

Hose Pipe

Maximum length 8 m 10 m

1 elbow 45° -1.0 m -0.3 m

1 elbow 90° -1.8 m -0.6 m

1 elbow 90° short -2.7 m

1 wall passage -2.0 m -2.0 m

C Each elbow and other passages

should be subtracted from the above

maximum length.

To connect a ventilation hose;

1. Fit the hose adaptor (90° or flat

adaptor) by pressing it on the air outlet

at the rear of your machine. Close

the remaining 2 air outlets with plastic

covers.

2. Connect the air outlet hose to the

hose spacer piece (90° or flat adaptor)

by turning it anti-clockwise.

3. Make the hose passages as shown

below.

3 Installation

Appropriate installation

location

• Installyourmachineinenvironments

which have no risk of freezing and in a

stable and level position.

• Donotplaceyourmachineonalong

pile rug or on similar surfaces.

• Operateyourmachineinawell

ventilated, dust-free environment.

• Donotblocktheairductsinfrontof

and under the machine with materials

such as long pile rugs and wooden

bands.

B Make sure that your machine is not

placed on the power cable.

B Keep at least 1. 5 cm from the edges

of other furniture.

Under Counter Installation

• Aspecialpart(Partno:295950

0100) replacing the top trim must

be provided and installed by the

Authorized Service in order to use

the machine under a counter or

in a cupboard. It should never be

operated without the top trim.

• Leaveatleast3cmofspacebetween

the side and rear walls of the machine

and the walls of the counter/cupboard

when installing your machine under a

counter or in a cupboard.

Use on a washing machine

• Afittingdeviceshouldbeused

between the two machines for use on

a washing machine. The fitting device

(Part no. 295 560 0100) must be

installed by the Authorized Service.

• Placethemachineonasoundfloor.If

it is to be placed on top of a washing

machine, the approximate weight

together may reach 180 kg when they

are full. Therefore, the floor must be

capable of carrying the load on it!

Adjusting the feet

In order to ensure that your machine

operates more silently and vibration-free, it

must stand level and balanced on its feet.

Balance the machine by adjusting the feet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg taf 7330 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg taf 7330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info