Bedienungsanleitung Blomberg TKF 7230 (Seite 37 von 44) (Englisch)

581545

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

14 - EN

Time delay

If you wish to dry your clothes at a later

time, thanks to the time delay function,

you can delay the program start up to 3

hours, 6 hours or 9 hours.

1. Opentheloadingdoorandputthe

laundry in.

C Make sure that all air outlets are open,

door filter is cleaned and the water

tank is empty.

2. Set the drying program, temperature,

spin speed and, if required, the

auxiliary functions.

3. When the time programming button

is pressed once, a 3 hour delay is

selected and the relevant led lights.

When the same button is pressed

again,6hours;andifpressedonce

more, 9 hours delay will be selected.

If the time programming button is

pressed one more time, time delaying

function will be cancelled. Set the time

delay as you require.

4. Delayed operation of the selected

program is started by pressing the

"Start/Pause/Cancel" button after

selecting the time delay.

C Additional laundry may be loaded /

taken out during the time delay period.

Canceling the time delay

If you want to cancel the time delay

countdown and start the program:

1. Press “Start/Pause/Cancel” button

for about 4 seconds. The “:” in the

middle of the screen will stop flashing.

“Start/Pause/Cancel” light will go off

and the remaining time on the screen

disappears.

2. Press "Start/Pause/Cancel" button to

start the program right away.

Starting the Program

1. Press "Start/Pause/Cancel" button to

start the program.

2. “Start/Pause/Cancel” button will light

up to indicate that the program has

started.

Auxiliary function

Cancel Audio Warning

Yourmachinewillsendoutanaudio

warning when the program comes to an

end. If you do not want to hear this

buzzing, you need to press the “Cancel

Audio Warning” button. The relevant LED

will light up when this button is pressed

and an audio warning will not be given

when the program comes to an end.

C Youcanselectthisfunctioneither

before or after the program starts.

Warning indicators

Warning indicators may differ

according to the model of your

machine.

Child-proof lock

A warning LED will light up as long as the

child-proof lock remains activated.

Filter cleaning

A warning LED will light up to remind filter

cleaning after the program finishes.

C If the filter cleaning warning lights up

continuously, please refer to, “Solution

suggestions for problems”.

Tank full

A warning LED will light up at the end of

the program or when the tank is full with

water. The machine stops operating

when this warning LED lights up during a

program running. To restart the machine,

please drain the water in the water tank.

Press "Start/Pause/Cancel" button to start

the program after you have emptied the

water tank. The warning LED goes off and

the program resumes operating.

Cleaning the condenser.

It will light up periodically after maximum 5

drying cycles for the purpose of reminding.

In this case and after drying, clean as

explained in the section “Maintenance and

Cleaning”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 7230 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg TKF 7230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info