Bedienungsanleitung Blomberg TKF 7330 A (Seite 38 von 44) (Deutsch, Englisch)

581547

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

15 - EN

updated automatically.

Canceling the time delay

If you want to cancel the time delay

countdown and start the program:

1. Press the “Start/Pause/Cancel” button

for about 4 seconds. The “:” in the

middle of the screen will stop flashing.

The “Start/Pause/Cancel” light will

go off and the remaining time on the

screen disappears.

2. Press the "Start/Pause/Cancel" button

to start the program right away.

Starting the Program

1. Press the "Start/Pause/Cancel" button

to start the program.

2. The “Start/Pause/Cancel” button will

light up to indicate that the program

has started.

Progress of program

Progress of a running program is shown

through the program follow-up indicator.

At the beginning of every program step,

the relevant indicator lamp will light up and

light of the completed step will turn off.

"Drying":

- Drying level will be illuminated during

the whole drying process until the drying

degree reaches "iron dry".

"Iron Dry":

- Starts to illuminate when the drying

degree reaches "iron dry" step and remains

illuminated until the next step.

"Cupboard Dry":

- Starts to illuminate when the drying degree

reaches "Cupboard dry" step and remains

illuminated until the next step.

“Cooling”:

- It lights up during the 4-minute cooling

phase at the end of drying.

“Final / Anti-creasing”:

- Illuminates when the program comes

to an end and anti-creasing function is

activated.

Important:

If more than one LED light up or flash

concurrently, it means there is malfunctioning

or a failure (please see, Solution

suggestions for problems).

Changing the program after the

program has started

Youcanusethisfeatureafteryourmachine

has started to dry your clothes under higher

or lower temperatures.

For example;

Press and hold the “Start/Pause/Cancel”

button for about 4 seconds to “Cancel”

the program in order to select “Extra Dry”

program instead of “Iron Ready” program.

Select the “Extra Dry” program by rotating the

program knob.

Press the "Start/Pause/Cancel" button to

start the program.

C The program which is selected first will

go on even if the program selection

button is moved and another program

mode is selected while the machine is

operating.Youmustcanceltheongoing

program in order to change the drying

program. (See, Ending the program

through canceling)

Adding/removing laundry in standby

mode

In order to add or take out laundry after the

start-up of the program;

1. Press the “Start/Pause/Cancel” button

to switch the machine to “Pause” mode.

Drying process will stop.

2. OpenthedooratStoppositionandclose

it again after adding or taking out laundry.

3. Press "Start/Pause/Cancel" button to

start the program.

C Any laundry added after the drying

process was started may cause the

already dried clothes in the machine

intermingle with wet clothes and the

result will be wet laundry after the drying

process is over.

C Laundry may be added or taken out

as much as desired during a drying

process, but as this process will interrupt

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 7330 A Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info